GATEDRIVETRANSFORMERS
Outgassing Compliant Gate Drive Transformers
• Designed for high switching speed, transformer coupled
MOSFET and IGBT gate drive circuits.
• Operating frequency: 50 kHz – 2 MHz
• Primary to secondary isolation: 1500 Vdc. For 1011 and
2011, isolation between secondaries is 500 Vdc.
Core material Ferrite
Terminations Tin-lead over tin over nickel over phos bronze. Other
terminations are available at additional cost
Weight 535 – 615 mg
Ambient temperature –55°C to +125°C
Maximum part temperature +125°C (ambient + temp rise).
Storage temperature Component: –55°C to +125°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250/7″ reel Plastic tape: 16 mm wide, 0.36 mm thick,
20 mm pocket spacing, 5.54 mm pocket depth
Turns
ratio
pri : sec
Primary
Leakage
Primary
Secondary
DCR max
(Ohms)
Volt-time SRF Capacitance
inductance2 inductance3 DCR max
product
(V-µsec) (MHz)
min4
pri to sec
max (pF)
Part number1
min (µH)
max (µH)
(Ohms)
CP-N0531-1010SZ
CP-N0531-1510SZ
CP-N0531-1011SZ
CP-N0531-2011SZ
1:1
296.0
680.0
264.0
330.0
1.5
4.0
0.30
0.60
0.795
1.65
1.50
1.40
0.655
0.860
25.8
40.8
24.5
24.5
1.75
1.00
2.50
2.00
14.0
14.0
95.0
18.0
1.5:1
1:1:1
2:1:1
1.50 (2-5; 3-4)
0.650 (2-5); 0.790 (3-4)
1. When ordering, please specify terminations and testing codes:
CP-N0531-2011SZ
Termination: S = Tin-lead (63/37) or
T = Tin-silver-copper (95.5/4/0.5)
0.213
max
5,40
0.004/0,10
0.022
0,55
Testing:
Z = Unscreened
0.260
6,60
H = Group A screening per Coilcraft CP-SA-10001
T = Screening per MIL-STD-981, Family 11
U = Screening per EEE-INST-002
F = Screening per ESCC 3201
All screening performed to the document’s latest revision
max
0.323
max
8,20
0.024
0,60
5,60
0.035
0,90
0.220
0.063
1,60
0.228
5,80
1
2
3
6
5
4
Custom screening also available
3
2
1
4
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
3. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary
pins shorted.
4. SRF is for the primary, measured with the secondary shorted using an
Agilent/HP 4192 or equivalent.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.073
5
1,85
6
0.073
1,85
Recommended
Suggested
Land Pattern
Land Pattern
inches
mm
Dimensions are in
1010, 1510
1011, 2011
4
1
2
Pri
Sec
1
Pri
6
6
3
5
Sec
3
4
Document CP512 Revised 09/06/18
®
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
Fax 847-639-1508
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2018