CMG03A
Rectifier Diode Silicon Diffused Junction
CMG03A
1. Applications
•
General-Purpose Rectifiers
2. Features
(1) Repetitive peak reverse voltage: VRRM = 600 V
(2) Average forward current: IF(AV) = 2.0 A
(3) Peak forward voltage: VFM = 1.1 V (max) (@IFM = 2.0 A) (pulse measurement)
(4) High ESD protection
(5) The use of small, thin surface-mount package is optimum way for high-density mounting.
Nickname: M-FLATTM
3. Packaging and Internal Circuit
1: Anode
2: Cathode
M-FLAT
4. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25�)
Characteristics
Repetitive peak reverse voltage
Symbol
Rating
Unit
VRRM
IF(AV)
IFSM
Tj
600
2.0
V
A
Average forward current
(Note 1)
(Note 2)
Non-repetitive peak forward surge current
Junction temperature
80
A
150
�
�
Storage temperature
Tstg
-55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Tℓ = 115 �, device mounted on a ceramic board
(board size: 50 mm × 50 mm, soldering land size: 2 mm × 2 mm, board thickness: 0.64 mm)
Note 2: f = 50 Hz, half-sine wave, non-repetitive
Start of commercial production
2020-12
©2020-2022
Toshiba Electronic Devices & Storage Corporation
2022-03-04
Rev.2.0
1