CDCLVD2108
www.ti.com
SCAS905C –OCTOBER 2010–REVISED DECEMBER 2010
Dual 1:8 Low Additive Jitter LVDS Buffer
Check for Samples: CDCLVD2108
1
FEATURES
DESCRIPTION
•
Dual 1:8 Differential Buffer
•
Low Additive Jitter <300 fs RMS in
10 kHz to 20 MHz
The CDCLVD2108 clock buffer distributes two clock
inputs (IN0, IN1) to a total of 16 pairs of differential
LVDS clock outputs (OUT0, OUT15). Each buffer
block consists of one input and 8 LVDS outputs. The
inputs can either be LVDS, LVPECL, or LVCMOS.
•
•
Low Within Bank Output Skew of 50 ps (Max)
Universal Inputs Accept LVDS, LVPECL,
LVCMOS
The CDCLVD2108 is specifically designed for driving
50-Ω transmission lines. In case of driving the inputs
in single ended mode, the appropriate bias voltage
(VAC_REF) should be applied to the unused negative
input pin.
•
•
One Input Dedicated for Eight Outputs
Total of 16 LVDS Outputs, ANSI EIA/TIA-644A
Standard Compatible
•
•
•
Clock Frequency up to 800 MHz
2.375–2.625V Device Power Supply
Using the control pin (EN) outputs can be either
disabled or enabled. If the EN pin is left open all
outputs are active, if switched to a logical '0' all
outputs are disabled (static logical 0), if switched to a
logical '1', OUT (8..15) are switched off and OUT
(0..7) are active. The part supports a fail safe
function. It incorporates an input hysteresis, which
prevents random oscillation of the outputs in absence
of an input signal.
LVDS Reference Voltage, VAC_REF, Available for
Capacitive Coupled Inputs
•
•
•
Industrial Temperature Range –40°C to 85°C
Packaged in 7mm × 7mm 48-Pin QFN (RGZ)
ESD Protection Exceeds 3 kV HBM, 1 kV CDM
APPLICATIONS
The device operates in 2.5V supply environment and
is characterized from –40°C to 85°C (ambient
temperature). The CDCLVD2108 is packaged in
small 48-pin, 7-mm x 7-mm QFN package.
•
•
•
•
•
Telecommunications/Networking
Medical Imaging
Test and Measurement Equipment
Wireless Communications
General Purpose Clocking
200 MHz
PHY2
PHY2
PHY2
PHY2
PHY 28
Clock
Generator
EN
CDCLVD2108
100 MHz
PHY2
PHY2
PHY16
Figure 1. Application Example
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated