SP003597098
BGSA142MN12
High RF Voltage SP4T Switch
Features
Designed for high linearity and high RF voltage tuning applications
Multiple selectable switch configurations:
Each throw directly and independently controlled
Low RON resistance of 1.75 Ω at each port in ON state
Low COFF capacitance of 110 fF at each port in OFF state
High RF operating voltage of 72 V at RFx and 67 V at RFC in OFF state
Low harmonic generation
MIPI 2.0 RFFE control interface
4 USID addresses enabled by external condition at USID_sel pin
and SCLK/SDATA swap mode
Supply voltage range: 1.65 to 1.95 V
No RF parameter change within supply voltage range
Small form factor 1.5 mm x 1.5 mm (MSL1, 260° C per JEDEC J-STD-020)
RoHS and WEEE compliant package
Description
The BGSA142MN12 is a versatile direct mapping Single-Pole Quad Thro (SP4T) RF switch optimized for low COFF
as well as low RON enabling applications up to 6.0 GHz. Including a MIPI RFFE digital control interface, all the
throw states can be programmed in the same RFFE command enabling SP4T, SP3T, SPDT along with SPST
topology for a better flexibility in RF Front-End designs.
The BGSA142MN12 includes 4 low RON and high RF voltage ports making it ideal for antenna tuning and tunable
matching network applications. RFC as well as RF1, RF2, RF3 and RF4 can handle high RF Voltage (bidirectional
RF Voltage handling). Due to its very high RF voltage ruggedness on all RF ports, it is suited for switching any
reactive devices such as inductors and capacitors without significant losses.
Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level,
resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only
required if DC voltage is applied externally.
Datasheet Summary
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 2
Revision 1.1
2020-02-17