SP005060640
BGSA402ML10
Low Resistance Antenna Tuning Shunt Switch
Features
Designed for high-linearity antenna aperture switching and RF tuning
applications
Multiple selectable switch configurations
Ultra low RON resistance of 1.49 Ω in ON state
Low COFF capacitance of 170 fF in OFF state
High RF operating voltage OFF state handling of >45 V
Low harmonic generation
MIPI RFFE 2.1 compliant control interface
Support 2 default USID via USID_Sel pin state
Supply voltage range: 1.65 to 3.6 V
No RF parameter change within supply voltage range
Small form factor 1.1 mm x 1.5 mm, MSL1, 260° C per JEDEC J-STD-020
RoHS and WEEE compliant package
Description
BGSA402ML10 is a versatile Shunt to Ground 4xSingle-Pole Single-Throw (4xSPST) RF antenna tuning switch. It
is optimized for low COFF as well as low RON enabling applications up to 6 GHz.
BGSA402ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and Power
Supply regulation. Its digital control interface is compliant with MIPI2.1 RFFE specification and each switch
throw can be programmed individually or all together in the same RFFE command frame. Up to 2 instantiations
of the same device can be controlled using the same RFFE bus thanks to its 2 states USID_Sel pin.
Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level,
resulting in excellent linear performance at all signal levels within the operating conditions. External DC
blocking capacitors at the RF ports are only required if DC voltage is applied externally. Due to its high RF
voltage ruggedness, it is suited for switching any reactive device such as inductor and capacitor in RF matching
circuits without significant losses.
Datasheet Summary
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 2
Revision 2.1
2019-10-25