BCR
Vishay Electro-Films
www.vishay.com
Thin Film, Back-Contact Resistor
FEATURES
• Wire bondable
• Only one wire bond required
• Small size: 0.020 inches square
• Resistance range: 10 to 1 M
• Oxidized silicon substrate for good power
dissipation
• Moisture resistant
Product may not be to scale
• Case size: 0202
LINKS TO ADDITIONAL RESOURCES
• Resistor material: tantalum nitride, self-passivating
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
APPLICATIONS
The Back Contact Resistor (BCR) series single-value
back-contact resistor chip is one of the smallest chips
available.
Vishay EFI BCR resistor chips are widely used in hybrid
packages where space is limited. The bottom connection is
made by attaching the back of the chip to the substrate
either eutectic or with conductive epoxy. The single wire
bond is made to the notched pad on the top of the chip. (The
other rectangular pad on the top of the chip is a via hole, a
low-ohmic contact connecting the resistor to the bottom of
the chip.)
The BCR requires only one wire bond thus saving hybrid
space.
The BCRs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The BCRs are 100 % electrically tested and
visually inspected to MIL-STD-883, method 2032 class H
or K.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
Total resistance range
Standard tolerances
TCR
VALUE
10 to 1M
0.1, 0.2, 0.ꢀ, 1, 2,
2ꢀ, ꢀ0, 100, 2ꢀ0
UNIT
%
ꢀ
ppm/°C
Tightest Standard Tolerance Available
2 % ꢀ %
1 % 0.2 % 0.ꢀ %
0.1 %
ꢀ2 ꢁꢁpm/°
20 ꢁꢁpm/°
100 ꢁꢁpm/°
ꢀ20 ꢁꢁpm/°
360 kΩ
1 MΩ
6ꢀ0 kΩ
ꢀ00 kΩ
10 Ω ꢀ0 Ω 20 Ω 100 Ω ꢀ00 Ω 1 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
UNIT
Noise, MIL-STD-202, method 308
100 to 2ꢀ0 k
< 100 or > 2ꢀ1 k
-3ꢀ typ.
-20 typ.
dB
Moisture resistance, MIL-STD-202, method 106
Stability, 1000 h, +12ꢀ °C, 12ꢀ mW
Operating temperature range
Thermal shock, MIL-STD-202, method 107, test condition F
High temperature exposure, +1ꢀ0 °C, 100 h
Dielectric voltage breakdown
0.ꢀ max. R/R
1.0 max. R/R
-ꢀꢀ to +12ꢀ
%
%
°C
%
%
V
0.2ꢀ max. R/R
0.ꢀ max. R/R
200
Insulation resistance
1012 min.
Operating voltage
7ꢀ max.
V
DC power rating at +70 °C (derated to zero at +17ꢀ °C)
ꢀ x rated power short-time overload, +2ꢀ °C, ꢀ s
0.2ꢀ0
0.2ꢀ max. R/R
W
%
Revision: 26-Oct-2020
Document Number: 61023
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000