Datasheet > B72205S0111K101

B72205S0111K101

更新时间： 2024-03-03 10:07:20

品牌	Logo	应用领域
东电化 - TDK		/
页数	文件大小	规格书
47页	1129K
描述
Max. Operating Voltage [AC]=115Vrms

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

B72205S0111K101 数据手册

Leaded varistors

StandarD series

B722*

Cautions and warnings

General

1. EPCOS metal oxide varistors are designed for specific applications and should not be used

for purposes not identified in our specifications, application notes and data books unless oth-

erwise agreed with EPCOS during the design-in-phase.

2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs

should be evaluated taking into consideration worst-case conditions.

3. For applications of SIOVs in line-to-ground circuits based on various international and local

standards there are restrictions existing or additional safety measures required.

Storage

1. Store SIOVs only in original packaging. Do not open the package prior to processing.

2. Recommended storage conditions in original packaging:

Storage temperature: ꢀ25 °C ... +45 °C,

Relative humidity:

<75% annual average,

<95% on maximum 30 days a year.

is to be avoided.

Dew precipitation:

3. Avoid contamination of an SIOV's during storage, handling and processing.

4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term

operation (examples given under operation precautions).

5. The SIOV type series should be soldered after shipment from EPCOS within the time speci-

fied:

SIOV-S, -Q, -LS, -B, -SNF

ETFV/ T series, -CU

24 months

12 months.

Handling

1. SIOVs must not be dropped.

2. Components must not be touched with bare hands. Gloves are recommended.

3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the

sharp edge of SIOV electrodes.

Soldering (where applicable)

1. Use rosin-type flux or non-activated flux.

2. Insufficient preheating may cause ceramic cracks.

3. Rapid cooling by dipping in solvent is not recommended.

4. Complete removal of flux is recommended.

5. Temperatures of all preheat stages and the solder bath must be strictly controlled especially

for T series (T14 and T20).

Please read Cautions and warnings and

Important notes at the end of this document.

Page 43 of 47

1...40 41 424344 45 46 47

中文翻译

下载PDF

与B72205S0111K101相关器件

型号	品牌	获取价格	描述	数据表
B72205S0111K111	EPCOS	获取价格	Leaded Varistors Taping
B72205S0111K211	EPCOS	获取价格	Leaded Varistors Taping
B72205S0131K101	EPCOS	获取价格	Leaded Varistors
B72205S0131K101	TDK	获取价格	Max. Operating Voltage [AC]=130Vrms
B72205S0131K111	EPCOS	获取价格	Leaded Varistors Taping
B72205S0131K211	EPCOS	获取价格	Leaded Varistors Taping
B72205S0140K101	EPCOS	获取价格	Leaded Varistors
B72205S0140K101	TDK	获取价格	Max. Operating Voltage [AC]=14Vrms
B72205S0140K111	EPCOS	获取价格	Leaded Varistors Taping
B72205S0140K211	EPCOS	获取价格	Leaded Varistors Taping