Leaded Varistors
Taping
Taping (leaded varistors)
All leaded varistors are available on tape.
Exception: S10K510 … K680, S14K510 … K1000, S20K385 … K1000.
Tape packaging for lead spacing
= 5 fully conforms to IEC 60286-2, while for lead spacings
= 7,5 and 10 the taping mode is based on this standard.
The ordering tables on page 213 ff list disk types available on tape in detail, i. e. with complete type
designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are cod-
ed in the type designation. For types not listed please contact EPCOS. Upon request parts with lead
spacing
= 5 mm are available in Ammopack too.
Designation system for taping mode
Type designation
bulk
Taped, reel type
Crimp style
(if relevant)
Lead spacing
(if relevant)
G
G2
G3 see page 208
G4
G5
R5 Lead spacing
R7 differs from
standard
S
S2
default =no extra
designation
S3 see page 212
version
S4
S5
Taped, Ammopack
GA
G2A
see page 209
Example SIOV-S10K250GS3R5
SIOV-S10K250
G
S3
R5
Taped
Crimp style 3
Lead spacing 5,0
(differs from LS 7,5
of standard version
S10K250)
Reel type I
Seating plane height
H0 =16
Example SIOV-S07K60G2AS2
SIOV-S07K60
G2A
S2
—
—
Taped
Seating plane height
H0 =18
Crimp style 2
Ammopack
206 04/02