AL1676
UNIVERSAL HIGH POWER FACTOR BUCK LED DRIVER
Description
Pin Assignments
The AL1676 is a universal AC input (85~277 VAC), high power factor
(PF) and high efficiency Buck LED driver. The AL1676 topology
provides accurate constant current (CC) with good line and load
regulation, operating at boundary conduction mode (BCM) to ease in
EMI/EMC qualification and testing to meet the latest regulatory laws.
(Top View)
7
1
2
3
4
D
VCC
ROVP
The AL1676 single Buck stage driver works with a single winding
inductor and High voltage MOSFET included, therefore, can use
fewer external components and create a low bill of material (BOM)
cost solution. The AL1676 has rich protection features to enhance
system safety and reliability, including under voltage lock out (UVLO),
LED open/short, over voltage, over current, over temperature
protection and thermal fold-back function which can reduce output
current when the driver’s temperature is higher than the setting value.
6
5
NC
CS
COMP
GND
SO-7
The AL1676 is available for SO-7 package.
Features
>90% Efficiency
Applications
Universal 85 to 277 VAC Input Range
Multiple Options for Internal MOSFET
Tight Output Current Tolerance: ±3%
Low Startup Current: 100µA
Retrofit LED Lamps
LED Tube
High Voltage DC-DC LED Driver
General Purpose Constant Current Source
Low Operation Current: 170µA (5KHs Switching)
Single Winding Inductor
Internal Protections:
.
Under Voltage Lock Out (UVLO)
.
.
.
.
.
Leading-Edge Blanking (LEB)
Cycle-by-cycle Over Current Protection (OCP)
Output Open/Short Protection (OVP/OSP)
Thermal Fold-back Protection (TFP)
Over Temperature Protection (OTP)
SO-7 Package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 15
www.diodes.com
February 2016
© Diodes Incorporated
AL1676
Document number: DS38290 Rev. 1 - 2