AL1692K
TRIAC DIMMABLE LED DRIVER
Description
Pin Assignments
The DIODES™ AL1692K is a high-performance, high-power factor,
high-efficiency, and high-current precision Boost, Buck-Boost, and
Flyback dimmable LED driver. The device is suited for TRIAC-
dimmable LED lamp applications and provides an accurate output
current over wide line and load regulation. It achieves higher than
90% efficiency by using a Boost topology to meet the latest high-
efficiency requirements. The wide switching frequency operates at
boundary conduction mode (BCM) to ease EMI/EMC design and
testing.
(Top View)
7
1
D
VCC
RT
COMP
GND
2
3
4
6
5
CS
FB
The AL1692K LED driver integrates
a 600V/2A high-voltage
MOSFET. It can cover both 120Vac and 230Vac TRIAC-dimmable
applications without the need for an external high-voltage MOSFET,
which reduces system bill-of-materials (BOM) cost. The AL1692K has
built-in thermal fold-back protection to automatically reduce output
current. Other protection features also enhance LED lighting system's
safety and reliability.
SO-7
Applications
Mains TRIAC-dimmable LED lamps
Offline LED power supply drivers
The device’s TRIAC dimming curve is compliant with the NEMA SSL6
standard and applies to a wide range of leading and trailing edge
dimmers, achieving a deep dim down to 1%.
The AL1692K is available in the SO-7 package.
Features
High Efficiency > 90% (Boost Topology)
Tight Current Sense Tolerance: ± 3%
Low Startup Current: 100µA Typical
Low Operation Current: 210µA (Switching Frequency at 4kHz)
Single Winding Inductor
Wide Range of TRIAC Dimmer Compatibility
Integration of 600V/2A MOSFET
NEMA SSL6 Dimming Curve Compliant
Internal Protections
.
Undervoltage Lockout (UVLO)
.
.
.
.
.
Leading-Edge Blanking (LEB)
Cycle-By-Cycle Overcurrent Protection (OCP)
Output Open/Short Protection (OVP/OSP)
Thermal Foldback Protection (TFP)
Overtemperature Protection (OTP)
SO-7 Package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP
capable, and manufactured in IATF 16949 certified facilities),
please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 14
www.diodes.com
December 2022
© 2022 Copyright Diodes Incorporated. All Rights Reserved.
AL1692K
Document number: DS43402 Rev. 2 - 2