SHARC®
Embedded Processor
a
ADSP-21262
SUMMARY
KEY FEATURES
High performance 32-bit/40-bit floating-point processor
Code compatibility—at assembly level, uses the same
instruction set as other SHARC DSPs
Serial ports offer left-justified sample-pair and I2S support
via 12 programmable and simultaneous receive or trans-
mit pins, which support up to 24 transmit or 24 receive I2S
channels of audio when all six serial ports (SPORTs) are
enabled or six full duplex TDM streams of up to 128
channels per frame
At 200 MHz (5 ns) core instruction rate, the ADSP-21262
operates at 1200 MFLOPS peak/800 MFLOPS sustained
performance whether operating on fixed- or floating-point
data
400 MMACS sustained performance at 200 MHz
Super Harvard Architecture—three independent buses for
dual data fetch, instruction fetch, and nonintrusive, zero-
overhead I/O
Transfers between memory and core at up to four 32-bit
floating- or fixed-point words per cycle, sustained
2.4G byte/s bandwidth at 200 MHz core instruction rate
and 900M byte/sec is available via DMA
Single-instruction multiple-data (SIMD) computational archi-
tecture—two 32-bit IEEE floating-point/32-bit fixed-point/
40-bit extended precision floating-point computational
units, each with a multiplier, ALU, shifter, and register file
High bandwidth I/O—a parallel port, an SPI® port, six serial
ports, a digital applications interface (DAI), and JTAG
DAI incorporates two precision clock generators (PCGs), an
input data port (IDP) that includes a parallel data acquisi-
tion port (PDAP), and three programmable timers, all
under software control by the signal routing unit (SRU)
On-chip memory—2M bit of on-chip SRAM and a dedicated
4M bit of on-chip mask-programmable ROM
The ADSP-21262 is available in commercial and industrial
temperature grades. For complete ordering information,
see Ordering Guide on Page 46.
DUAL PORTED MEMORY
BLOCK 0
DUAL PORTED MEMORY
BLO CK 1
CORE PROCESSOR
INSTRUCTION
SRAM
1M BIT
SRAM
1M BIT
CACHE
TIMER
ROM
ROM
2M BIT
2M BIT
DAG1
DAG2
PROGRAM
SEQ UENCER
ADDR
DATA
ADDR
DATA
32
32
PM ADDRESS BUS
DM ADDRESS BUS
64
64
PM DATA BUS
DM DATA BUS
IOD
(32)
IOA
(18)
DMA CONTROLLER
PX REGISTER
4
22 CHANNELS
GPIO FLAGS/
IRQ/TIMEXP
PROCESSING
ELEMENT
(PEX)
PROCESSING
ELEMENT
(PEY)
4
SPI PORT (1)
16
ADDRES S/
DATA BUS / GPIO
3
6
CONTROL/GPIO
SERIAL PORTS (6)
JTAG TEST & EMULATION
PARALLEL
PORT
IOP
REGISTERS
(MEMORY MAPPED)
20
SIGNAL
RO UTI NG
UNIT
INPUT
DATA PORTS (8)
PARALLEL DATA
ACQUISITION PORT
CONTROL,
STATUS,
DATA BUFFERS
PRECISION CLOCK
GENERATORS (2)
S
3
TIMERS (3)
DIGITAL APPLICATIONS INTERFACE
I/O PROCESSOR
Figure 1. Functional Block Diagram
SHARC and the SHARC logo are registered trademarks of Analog Devices, Inc.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
FAX: 781.461.3113
www.analog.com
© 2005 Analog Devices, Inc. All rights reserved.