50 mA/500 mA, Ultralow Power Step-Down
Regulator With Battery Voltage Monitor
Data Sheet
ADP5303
FEATURES
TYPICAL APPLICATION CIRCUIT
Input supply voltage range: 2.15 V to 6.50 V
Operates down to 2.00 V
V
=
IN
2.2µH
V
2.15V TO 6.50V
OUT
PVIN
EN
SW
10µF
Ultralow 240 nA quiescent current with no load
Selectable output voltages of 1.2 V to 3.6 V, or 0.8 V to 5.0 V
1.5ꢀ output accuracy over the full temperature range in
pulse-width modulation (PWM) mode
Selectable hysteresis mode or PWM operation mode
Output current
Up to 50 mA in hysteresis mode
Up to 500 mA in PWM mode
VINOK flag to monitor input battery voltage
100ꢀ duty cycle operation mode
ADP5303
10µF
(WLCSP-9)
ON
PGND
OFF
PWM
HYS
SYNC/
MODE
FB
VID0: 1.2V VID8: 2.5V
VID1: 1.5V VID9: 2.6V
VID2: 1.8V VID10: 2.7V
VID3: 2.0V VID11: 2.8V
VID4: 2.1V VID12: 2.9V
VID5: 2.2V VID13: 3.0V
VID6: 2.3V VID14: 3.3V
VID7: 2.4V VID15: 3.6V
VINOK
VID
R0
AGND
2 MHz switching frequency with optional synchronization
input from 1.5 MHz to 2.5 MHz
Figure 1.
Quick output discharge (QOD) option
UVLO, OCP, and TSD protection
9-ball, 1.65 mm × 1.87 mm WLCSP
Junction temperature: −40°C to +125°C
APPLICATIONS
Energy (gas, water) metering
Portable and battery-powered equipment
Medical applications
Keep-alive power supply
GENERAL DESCRIPTION
The ADP5303 is high efficiency, ultralow quiescent current
step-down regulator that draws only 240 nA quiescent current
to regulate the output at no load.
The ADP5303 integrates an ultralow power comparator with a
factory programmable voltage reference to monitor the input
battery voltage. The regulator runs at a 2 MHz switching frequency
in PWM mode and the SYNC/MODE pin can be synchronized
to an external clock from 1.5 MHz to 2.5 MHz.
The ADP5303 runs from an input voltage of 2.15 V to 6.50 V,
allowing the use of multiple alkaline or NiMH cells, Li-Ion cells,
or other power sources. The output voltage is selectable from 0.8 V
to 5.0 V by an external VID resistor and a factory fuse. The
total solution requires only four tiny external components.
Other key features in the ADP5303 include separate enabling,
QOD, and safety features such as overcurrent protection (OCP),
thermal shutdown (TSD), and input undervoltage
lockout (UVLO).
The ADP5303 can operate between hysteresis mode and PWM
mode via the SYNC/MODE pin. In hysteresis mode, the regulator
achieves excellent efficiency at less than 1 mW and provides up
to 50 mA of output current. In PWM mode, the regulator
The ADP5303 is available in 9-ball, 1.65 mm × 1.87 mm
WLCSP package rated for the −40°C to +125°C junction
temperature range.
produces a lower output ripple and supplies up to 500 mA of
output current. The flexible configuration capability during
operation of the device enables very efficient power management
to meet both long battery life and low system noise requirements.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2015–2019 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com