Ultralow Power Step-Down Regulator
for Energy Harvesting
ADP5304
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUIT
2.2µH
V
= 2.15V TO 6.5V
V
OUT
Input supply voltage range: 2.15 V to 6.50 V
Operation down to 2.00 V typical
IN
PVIN
SW
10µF
ADP5304
10µF
Ultralow, 260 nA typical quiescent current with no load
Selective output voltage from 1.2 V to 3.6 V (or 0.8 V to 5.0 V)
2.5ꢀ output accuracy over the full temperature range
Output current up to 50 mA in hysteresis mode
VINOK flag to monitor the input voltage
ON
EN
PGND
OFF
MODE
FB
NC
VINOK
VID0: 1.2V VID8: 2.5V
VID1: 1.5V VID9: 2.6V
VID2: 1.8V VID10: 2.7V
VID3: 2.0V VID11: 2.8V
VID4: 2.1V VID12: 2.9V
VID5: 2.2V VID13: 3.0V
VID6: 2.3V VID14: 3.3V
VID7: 2.4V VID15: 3.6V
100ꢀ duty cycle operation mode
Quick output discharge (QOD) option
Undervoltage lockout (UVLO), overcurrent protection (OCP),
and thermal shutdown (TSD) protection
AGND
VID
R0
EPAD
10-lead, 3 mm × 3 mm LFCSP package
−40°C to +125°C operating junction temperature range
Figure 1.
APPLICATIONS
Energy (gas, water) metering
Energy harvesting applications
Portable and battery-powered equipment
Medical applications
Keep-alive power supply
GENERAL DESCRIPTION
The ADP5304 is a high efficient, ultralow quiescent current
step-down regulator that draws only 260 nA of quiescent
current to regulate the output at no load.
energy harvester to charge up the conventional capacitor or
super capacitor.
The ADP5304 integrates an ultralow power comparator with a
factory programmable voltage reference to monitor the voltage
of the input power source. The voltage reference, with hysteresis, is
the threshold for the stopping and the starting of the switching,
allowing the use of the high impedance power source.
The ADP5304 runs from an input voltage range of 2.15 V to
6.50 V, allowing the use of the multiple alkaline, NiMH, and
Lithium cells, or the use of a high impedance power source. The
output voltage is selectable from 0.8 V to 5.0 V by an external
VID resistor to ground. The total solution requires only four
tiny external components.
Other key features of the ADP5304 include separate enabling
and a QOD. Safety features, such as OCP, TSD, and input
UVLO are also included.
The ADP5304 operates in hysteresis mode via connecting the
MODE pin to ground. In hysteresis mode, the regulator
achieves excellent efficiency at a power of less than 1 mW and
provides up to 50 mA of output load. The device enables very
efficient power management to achieve the collection of small
amounts of energy from the high impedance battery or the
The ADP5304 is available in 10-lead, 3 mm × 3 mm LFCSP
package rated for the −40°C to +125°C junction temperature range.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2015 Analog Devices, Inc. All rights reserved.
www.analog.com