1.5 Ω On Resistance, 15 ꢀV/1ꢁ ꢀV 5 ꢀ,
iCMOS, Quad SPST Switches
Data Sheet
ADG1411VADG141ꢁVADG1413
FEATURES
FUNCTIONAL BLOCK DIAGRAM
1.5 Ω on resistance
S1
S1
S1
0.3 Ω on-resistance flatness
0.1 Ω on-resistance match between channels
Continuous current per channel
LFCSP: 250 mA
TSSOP: 190 mA
Fully specified at +12 V, 15 V, and 5 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP
Qualified for automotive applications
IN1
IN2
IN3
IN4
IN1
IN2
IN3
IN4
IN1
IN2
IN3
IN4
D1
S2
D1
S2
D1
S2
D2
S3
D2
S3
D2
S3
ADG1411
ADG1412
ADG1413
D3
S4
D3
S4
D3
S4
D4
D4
D4
APPLICATIONS
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 1.
Automated test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Audio signal routing
Video signal routing
Communications systems
Relay replacement
GENERAL DESCRIPTION
The ADG1411/ADG1412/ADG1413 are monolithic complemen-
tary metal-oxide semiconductor (CMOS) devices containing
four independently selectable switches designed on an iCMOS®
process. iCMOS (industrial CMOS) is a modular manufacturing
process combining high voltage CMOS and bipolar technologies.
It enables the development of a wide range of high performance
analog ICs capable of 33 V operation in a footprint that no previous
generation of high voltage devices has been able to achieve.
Unlike analog ICs using conventional CMOS processes, iCMOS
components can tolerate high supply voltages while providing
increased performance, dramatically lower power consumption,
and reduced package size.
ADG1412 differ only in that the digital control logic is inverted.
The ADG1411 switches are turned on with Logic 0 on the
appropriate control input, whereas the ADG1412 switches are
turned on with Logic 1. The ADG1413 has two switches with
digital control logic similar to that of the ADG1411; the logic is
inverted on the other two switches. Each switch conducts equally
well in both directions when on and has an input signal range
that extends to the supplies. In the off condition, signal levels up
to the supplies are blocked.
The ADG1413 exhibits break-before-make switching action for
use in multiplexer applications. Inherent in the design is low
charge injection, which results in minimum transients when the
digital inputs are switched.
The on-resistance profile is very flat over the full analog input
range, ensuring excellent linearity and low distortion when
switching signals.
PRODUCT HIGHLIGHTS
1. 2.6 Ω maximum on resistance over temperature.
2. Minimum distortion.
3. Ultralow power dissipation: <0.03 μW.
iCMOS construction ensures ultralow power dissipation,
making the devices ideally suited for portable and battery-
powered instruments.
4. 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP.
The ADG1411/ADG1412/ADG1413 contain four independent
single-pole/single-throw (SPST) switches. The ADG1411 and
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com