12-Bit, 80 MSPS/105 MSPS/125 MSPS,
1.8 V Analog-to-Digital Converter
AD9233
FUNCTIONAL BLOCK DIAGRAM
FEATURES
AVDD
DRVDD
1.8 V analog supply operation
1.8 V to 3.3 V output supply
AD9233
SNR = 69.5 dBc (70.5 dBFS) to 70 MHz input
SFDR = 85 dBc to 70 MHz input
Low power: 395 mW @ 125 MSPS
Differential input with 650 MHz bandwidth
On-chip voltage reference and sample-and-hold amplifier
DNL = 0.15 LSB
Flexible analog input: 1 V p-p to 2 V p-p range
Offset binary, Gray code, or twos complement data format
Clock duty cycle stabilizer
VIN+
VIN–
8-STAGE
MDAC1
A/D
3
SHA
1 1/2-BIT PIPELINE
4
8
A/D
REFT
REFB
CORRECTION LOGIC
OR
13
OUTPUT BUFFERS
DCO
D11 (MSB)
D0 (LSB)
VREF
Data output clock
Serial port control
Built-in selectable digital test pattern generation
Programmable clock and data alignment
SENSE
SCLK/DFS
SDIO/DCS
CSB
CLOCK
DUTY CYCLE
STABILIZER
0.5V
MODE
SELECT
REF
SELECT
AGND
CLK+ CLK–
PDWN DRGND
APPLICATIONS
Ultrasound equipment
Figure 1.
IF sampling in communications receivers
IS-95, CDMA-One, IMT-2000
Battery-powered instruments
Hand-held scopemeters
The digital output data is presented in offset binary, Gray code, or
twos complement formats. A data output clock (DCO) is provided
to ensure proper latch timing with receiving logic.
The AD9233 is available in a 48-lead LFCSP and is specified
over the industrial temperature range (−40°C to +85°C).
Low cost digital oscilloscopes
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD9233 is a monolithic, single 1.8 V supply, 12-bit, 80 MSPS/
105 MSPS/125 MSPS analog-to-digital converter (ADC), featuring
a high performance sample-and-hold amplifier (SHA) and on-
chip voltage reference. The product uses a multistage differential
pipeline architecture with output error correction logic to
provide 12-bit accuracy at 125 MSPS data rates and guarantees
no missing codes over the full operating temperature range.
1. The AD9233 operates from a single 1.8 V power supply
and features a separate digital output driver supply to
accommodate 1.8 V to 3.3 V logic families.
2. The patented SHA input maintains excellent performance
for input frequencies up to 225 MHz.
The wide bandwidth, truly differential SHA allows a variety of
user-selectable input ranges and offsets, including single-ended
applications. It is suitable for multiplexed systems that switch
full-scale voltage levels in successive channels and for sampling
single-channel inputs at frequencies well beyond the Nyquist rate.
Combined with power and cost savings over previously available
ADCs, the AD9233 is suitable for applications in communications,
imaging, and medical ultrasound.
3. The clock DCS maintains overall ADC performance over a
wide range of clock pulse widths.
4. A standard serial port interface supports various product
features and functions, such as data formatting (offset
binary, twos complement, or Gray coding), enabling the
clock DCS, power-down, and voltage reference mode.
5. The AD9233 is pin compatible with the AD9246, allowing
a simple migration from 12 bits to 14 bits.
A differential clock input controls all internal conversion cycles. A
duty cycle stabilizer (DCS) compensates for wide variations in the
clock duty cycle while maintaining excellent overall ADC
performance.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.