10-Bit, 170/200/250 MSPS
1.8 V A/D Converter
Preliminary Technical Data
AD9211
AVDD (1.8V)
AGND
FEATURES
AD9211
SNR = 60 dBFs @ fIN up to 70 MHz @ 250 MSPS
ENOB of 9.7 @ fIN up to 70 MHz @ 250 MSPS (–0.5 dBFS)
SFDR = 80 dBc@ fIN up to 70 MHz @ 250 MSPS (–0.5 dBFS)
Excellent Linearity
DNL = 0.3 LSB (Typical)
INL = 0.5 LSB (Typical)
LVDS at 250 MSPS (ANSI-644 levels)
900 MHz Full Power Analog Bandwidth
On-Chip Reference and Track-and-Hold
Power Dissipation = 380 mW Typical @ 250 MSPS
1.25 V Input Voltage Range
DrVDD (1.8V)
Ref
DGND
(Pin 0)
VIN+
VIN-
T/H
Output
Staging -
LVDS
10
ADC
10-bit
Core
10
D9-D0
(D4-D0 DDR mode)
OTR+
OTR-
CLK+
CLK-
Clock
Mgmt
Serial Port
DCO+
DCO-
RESET SCLK SDIO CSB
1.8 V Analog Supply Operation
Output Data Format Option
Figure 1. Functional Block Diagram
Data Clock Output Provided
Clock Duty Cycle Stabilizer
Fabricated on an advanced CMOS process, the AD9211 is
available in a 56-lead chip scale package (56 LFCSP) specified
over the industrial temperature range (–40°C to +85°C).
APPLICATIONS
Wireless and Wired Broadband Communications
Cable Reverse Path
PRODUCT HIGHLIGHTS
1. High Performance—Maintains 60 dB SNR @ 250 MSPS
with a 65 MHz input.
Communications Test Equipment
Radar and Satellite Subsystems
Power Amplifier Linearization
2. Low Power—Consumes only 380mW @ 250 MSPS.
3. Ease of Use—LVDS output data and output clock signal
allow interface to current FPGA technology. The on-chip
reference and sample/hold provide flexibility in system
design. Use of a single 1.8 V supply simplifies system
power supply design. Supported DDR mode reduces
number of output data traces
PRODUCT DESCRIPTION
The AD9211 is a 10-Bit monolithic sampling analog-to-digital
converter optimized for high performance, low power, and ease
of use. The product operates up to a 250 MSPS conversion rate
and is optimized for outstanding dynamic performance in
wideband carrier and broadband systems. All necessary
functions, including a track-and-hold (T/H) and voltage
reference, are included on the chip to provide a complete signal
conversion solution.
4. Serial Port Control - Standard serial port interface
supports various product functions such as data
formatting, enabling a clock duty cycle stabilizer, power
down, gain adjust and output test pattern generation.
The ADC requires a 1.8 V analog voltage supply and a
differential clock for full performance operation. The digital
outputs are LVDS (ANSI-644) compatible and support either
twos complement, offset binary format or gray code. A data
clock output is available for proper output data timing.
5. Pin compatible family – 12-bit pin compatible family
offered as AD9230.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2006 Analog Devices, Inc. All rights reserved.