16-Bit, 4-Channel/8-Channel,
250 kSPS PulSAR ADC
Data Sheet
AD7682/AD7689
FEATURES
FUNCTIONAL BLOCK DIAGRAM
2.3V TO 5.5V
0.5V TO VDD – 0.5V
0.1µF
0.5V TO VDD
10µF
16-bit resolution with no missing codes
4-channel (AD7682)/8-channel (AD7689) multiplexer with
choice of inputs
REFIN
REF
VDD
Unipolar single-ended
Differential (GND sense)
1.8V
TO
VDD
BAND GAP
REF
VIO
AD7682/AD7689
Pseudobipolar
Throughput: 250 kSPS
INL: 0.4 LSB typical, 1.5 LSB maximum ( 23 ppm or FSR)
Dynamic range: 93.8 dB
SINAD: 92.5 dB at 20 kHz
THD: −100 dB at 20 kHz
Analog input range: 0 V to VREF with VREF up to VDD
Multiple reference types
TEMP
SENSOR
CNV
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
SCK
SDO
DIN
SPI SERIAL
INTERFACE
16-BIT SAR
ADC
MUX
ONE-POLE
LPF
SEQUENCER
COM
GND
Internal selectable 2.5 V or 4.096 V
External buffered (up to 4.096 V)
External (up to VDD)
Figure 1.
Internal temperature sensor (TEMP)
Channel sequencer, selectable 1-pole filter, busy indicator
No pipeline delay, SAR architecture
Single-supply 2.3 V to 5.5 V operation with 1.8 V to 5.5 V
logic interface
Serial interface compatible with SPI, MICROWIRE, QSPI,
and DSP
Power dissipation
3.5 mW at 2.5 V/200 kSPS
12.5 mW at 5 V/250 kSPS
Standby current: 50 nA
Low cost grade available
GENERAL DESCRIPTION
The AD7682/AD7689 are 4-channel/8-channel, 16-bit, charge
redistribution successive approximation register (SAR) analog-
to-digital converters (ADCs) that operate from a single power
supply, VDD.
The AD7682/AD7689 contain all components for use in a
multichannel, low power data acquisition system, including a
true 16-bit SAR ADC with no missing codes; a 4-channel
(AD7682) or 8-channel (AD7689) low crosstalk multiplexer
that is useful for configuring the inputs as single-ended (with or
without ground sense), differential, or bipolar; an internal low
drift reference (selectable 2.5 V or 4.096 V) and buffer; a
temperature sensor; a selectable one-pole filter; and a sequencer
that is useful when channels are continuously scanned in order.
20-lead 4 mm × 4 mm LFCSP package
20-lead 2.4 mm × 2.4 mm WLCSP package
APPLICATIONS
The AD7682/AD7689 use a simple SPI interface for writing to
the configuration register and receiving conversion results. The
SPI interface uses a separate supply, VIO, which is set to the
host logic level. Power dissipation scales with throughput.
Multichannel system monitoring
Battery-powered equipment
Medical instruments: ECG/EKG
Mobile communications: GPS
Power line monitoring
The AD7682/AD7689 are housed in a tiny 20-lead LFCSP and
20-lead WLCSP with operation specified from −40°C to +85°C.
Data acquisition
Seismic data acquisition systems
Instrumentation
Process control
Table 1. Multichannel 14-/16-Bit PulSAR® ADC
Type
Channels 250 kSPS 500 kSPS ADC Driver
14-Bit
16-Bit
16-Bit
8
4
8
AD7949
AD7682
AD7689
ADA4841-x
ADA4841-x
ADA4841-x
AD7699
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,nor foranyinfringementsofpatentsorother
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices.Trademarks andregisteredtrademarks are the propertyoftheir respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com