18-Bit, 1.5 LSB INL, 400 kSPS PulSAR®
Differential ADC in MSOP/QFN
AD7690
APPLICATION EXAMPLE
FEATURES
+2.5V TO +5V
+5V
18-bit resolution with no missing codes
Throughput: 400 kSPS
INL: 0.7ꢀ LSB typ, 1.ꢀ LSB max ( 6 ppm of FSR)
Dynamic range: 102 dB @ 400 kSPS
Oversampled dynamic range: 12ꢀ dB @ 1 kSPS
Noise-free code resolution: 20 bits @ 1 kSPS
Effective resolution: 22.7 bits @ 1 kSPS
SINAD: 101.ꢀ dB @ 1 kHz
VIO
SDI
+1.8V TO VDD
REF VDD
GND
IN+
IN–
3- OR 4-WIRE
SCK
SDO
CNV
INTERFACE
±10V, ±5V, ...
(SPI, DAISY CHAIN, CS)
ADA4941-1
AD7690
Figure 2.
THD: −12ꢀ dB @ 1 kHz
True differential analog input range: VREF
0 V to VREF with VREF up to VDD on both inputs
No pipeline delay
Single-supply ꢀ V operation with
1.8 V/2.ꢀ V/3 V/ꢀ V logic interface
Serial interface, SPI®/QSPI™/MICROWIRE™/DSP compatible
Daisy-chain multiple ADCs and busy indicator
Power dissipation
Table 1. MSOP, QFN (LFCSP)/SOT-23
14-/16-/18-Bit PulSAR ADC
400 kSPS
to
ꢀ00 kSPS kSPS
100
kSPS
2ꢀ0
kSPS
1000
ADC
Driver
Type
18-Bit True
Differential
AD7691 AD7690
AD7982
AD7982 ADA4941
ADA4841
16-Bit True
Differential
AD7684 AD7687 AD7688
AD7693
ADA4941
ADA4841
4.2ꢀ μW @ 100 SPS
4.2ꢀ mW @ 100 kSPS
Standby current: 1 nA
16-Bit Pseudo AD7680 AD7685 AD7686
Differential AD7683 AD7694
AD7980 ADA4841
10-lead package: MSOP (MSOP-8 size) and
3 mm × 3 mm QFN (LFCSP) (SOT-23 size)
Pin-for-pin compatible with QFN/MSOP PulSAR ADCs
14-Bit Pseudo AD7940 AD7942 AD7946
Differential
ADA4841
GENERAL DESCRIPTION
APPLICATIONS
The AD7690 is an 18-bit, successive approximation, analog-to-
digital converter (ADC) that operates from a single power supply,
VDD. It contains a low power, high speed, 18-bit sampling ADC
with no missing codes, an internal conversion clock, and a
versatile serial interface port. On the CNV rising edge, it
samples the voltage difference between the IN+ and IN− pins.
The voltages on these pins swing in opposite phase between 0 V
and REF. The reference voltage, REF, is applied externally and
can be set up to the supply voltage.
Battery-powered equipment
Data acquisition
Seismic data acquisition systems
DVMs
Instrumentation
Medical instruments
1.5
POSITIVE INL = +0.42LSB
NEGATIVE INL = –0.6LSB
1.0
0.5
The power of the AD7690 scales linearly with the throughput.
The SPI-compatible serial interface also features the ability,
using the SDI input, to daisy-chain several ADCs on a single,
3-wire bus and provides an optional busy indicator. It is compatible
with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIO supply.
0
–0.5
–1.0
–1.5
The AD7690 is housed in a 10-lead MSOP or a 10-lead QFN
(LFCSP) with operation specified from −40°C to +85°C.
0
65536
131072
CODE
196608
262144
Figure 1. Integral Nonlinearity vs. Code
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2011 Analog Devices, Inc. All rights reserved.