ACS781xLR
High-Precision Linear Hall-Effect-Based
Current Sensor IC With 200 µΩ Current Conductor
FEATURES AND BENEFITS
DESCRIPTION
▪ꢀCore-less,ꢀmicro-sized,ꢀ100ꢀAꢀcontinuousꢀcurrentꢀpackage
▪ꢀUltra-lowꢀpowerꢀloss:ꢀ200ꢀµΩꢀinternalꢀconductorꢀ
resistance
The Allegro ACS781xLR is a fully integrated current sensor
linear IC in a new core-less package designed to senseAC and
DC currents up to 100 A. This automotive-grade, low-profile
(1.5 mm thick) sensor IC package has a very small footprint.
The Hall sensor technology also incorporates common-mode
field rejection to optimize performance in the presence of
interferingmagneticfieldsgeneratedbynearbycurrentcarrying
conductors.
▪ꢀImmunityꢀtoꢀcommon-modeꢀfieldꢀinterference
▪ꢀGreatlyꢀimprovedꢀtotalꢀoutputꢀerrorꢀthroughꢀdigitallyꢀ
programmed and compensated gain and offset over the full
operating temperature range
▪ꢀIndustry-leadingꢀnoiseꢀperformanceꢀthroughꢀproprietaryꢀ
amplifier and filter design techniques
▪ꢀIntegratedꢀshieldꢀgreatlyꢀreducesꢀcapacitiveꢀcouplingꢀfromꢀ
current conductor to die due to high dV/dt signals, and
prevents offset drift in high-side, high-voltage applications
▪ꢀMonolithicꢀHallꢀICꢀforꢀhighꢀreliability
Thedeviceconsistsofaprecision,low-offsetlinearHallcircuit
with a copper conduction path located near the die. Applied
current flowing through this copper conduction path generates
a magnetic field which the Hall IC converts into a proportional
voltage. Device accuracy is optimized through the close
proximity of the primary conductor to the Hall transducer and
factory programming of the sensitivity and quiescent output
voltage at the Allegro factory.
▪ꢀ3ꢀtoꢀ3.6ꢀV,ꢀsingleꢀsupplyꢀoperation
▪ꢀ120ꢀkHzꢀtypicalꢀbandwidth
▪ꢀ3.6ꢀµsꢀoutputꢀriseꢀtimeꢀinꢀresponseꢀtoꢀstepꢀinputꢀcurrent
▪ꢀOutputꢀvoltageꢀproportionalꢀtoꢀACꢀorꢀDCꢀcurrentsꢀ
▪ꢀFactory-trimmedꢀforꢀaccuracy
▪ꢀExtremelyꢀstableꢀquiescentꢀoutputꢀvoltage
▪ꢀAEC-Q100ꢀautomotiveꢀqualification
Chopper-stabilized signal path and digital temperature
compensation technology also contribute to the stability of the
device across the operating temperature range.
High-level immunity to current conductor dV/dt and stray
electric fields, offered byAllegro proprietary integrated shield
technology for low-output voltage ripple and low-offset drift
in high-side, high-voltage applications.
PACKAGE:
7-pin PSOF package (suffix LR)
Theoutputofthedevicehasapositiveslope(>VCC/2)whenan
increasingcurrentflowsthroughtheprimarycopperconduction
Continued on the next page…
Not to scale
ACS781xLR
RF
CF
3
2
5
6
VOUT
GND
IP+
VOUT
IP
3.3 V
CBYP
0.1 µF
IP–
1
VCC
Typical Application
Application 1: The ACS781xLR outputs an analog signal, VOUT, that varies linearly with the bidirectional AC or DC primary
current, IP, within the range specified. CF is for optimal noise management, with values that depend on the application.
ACS781xLR-DS