PRELIMINARY
FEMTOCLOCKS™ CRYSTAL-TO-LVDS
FREQUENCY SYNTHESIZER
ICS844003I-02
GENERAL DESCRIPTION
FEATURES
• Three 3.3V LVDS outputs on two banks, Bank A with one
LVDS pair and Bank B with two LVDS output pairs
The ICS844003I-02 is a 3 differential output LVDS
ICS
HiPerClockS™
Synthesizer designed to generate Ethernet and PCI
Express™ reference clock frequencies and is a
• Using a 31.25MHz, 26.041666, or 25MHz crystal, the two
output banks can be independently set for 625MHz, 500MHz
312.5MHz, 250MHz, 156.25MHz, 125MHz or 100MHz
member of the HiPerClocks™ family of high
performance clock solutions from IDT. Using a
31.25MHz, 26.041666MHz, or 25MHz, 18pF parallel resonant
crystal, the following frequencies can be generated based on the
settings of 4 frequency select pins (DIV_SELA[1:0],
DIV_SELB[1:0]): 625MHz, 500MHz, 312.5MHz, 250MHz,
156.25MHz, 125MHz, and 100MHz.The 844003I-02 has 2 output
banks, Bank A with one differential LVDS output pair and Bank B
with two differential LVDS output pairs.
• Selectable crystal oscillator interface or LVCMOS/LVTTL
single-ended input
• VCO range: 490MHz to 680MHz
• RMS phase jitter @ 125MHz (1.875MHz - 20MHz):
0.50ps (typical)
• Full 3.3V supply mode
The two banks have their own dedicated frequency select pins
and can be independently set for the frequencies mentioned
above.The ICS844003I-02 uses IDT’s 3rd generation low phase
noise VCO technology and can achieve 1ps or lower typical
rms phase jitter, easily meeting Ethernet jitter requirements.
The ICS844003I-02 is packaged in a 32-pin VFQFN package.
• -40°C to 85°C ambient operating temperature
• Available in both standard (RoHS 5) and lead-free (RoHS 6)
packages
PIN ASSIGNMENT
32 31 30 29 28 27 26 25
QA0
24
23
GND
XTAL_IN
XTAL_OUT
XTAL_SEL
VCO_SEL
MR
1
2
3
4
5
6
7
8
nQA0
GND
ICS844003I-02 22
32-Lead VFQFN
QB0
nQB0
QB1
21
5mm x 5mm x 0.75mm
20
package body
K Package
Top View
19
nQB1
18
GND
nc
BLOCK DIAGRAM
VDDO_B
17
9
10 11 12 13 14 15 16
Pullup
OEA
Pulldown:Pullup
DIV_SELA[1:0]
Pullup
VCO_SEL
QA0
0 0 ÷1
nQA0
Pulldown
0 1 ÷2 (default)
1 0 ÷4
REF_CLK
XTAL_IN
0
1
0
1
1 1 ÷5
Phase
Detector
VCO
490-680MHz
OSC
XTAL_OUT
XTAL_SEL
Pullup
QB0
FB_DIV
0 0 ÷1
nQB0
0 1 ÷2 (default)
1 0 ÷4
0 = ÷20 (default)
1 = ÷24
QB1
1 1 ÷5
Pulldown
nQB1
FB_DIV
DIV_SELB[1:0]
MR
Pulldown:Pullup
Pulldown
Pullup
OEB
The Preliminary Information presented herein represents a product in pre-production.The noted characteristics are based on initial product characterization
and/or qualification.Integrated DeviceTechnology, Incorporated (IDT) reserves the right to change any circuitry or specifications without notice.
IDT™ / ICS™ LVDS FREQUENCY SYNTHESIZER
1
ICS844003AKI-02 REV. A FEBRUARY 22, 2007