TM
700MHZ, FEMTOCLOCK VCXO BASED
ICS843002I-41
SONET/SDH JITTER ATTENUATOR
General Description
Features
The ICS843002I-41 is a member of the
• Two Differential LVPECL outputs
S
IC
HiperClockS™ family of high performance clock
solutions from IDT. The ICS843002I-41 is a PLL
based synchronous clock generator that is
• Selectable CLKx, nCLKx differential input pairs
HiPerClockS™
• CLKx, nCLKx pairs can accept the following differential
input levels: LVPECL, LVDS, LVHSTL, SSTL, HCSL or
single-ended LVCMOS or LVTTL levels
optimized for SONET/SDH line card applications
where jitter attenuation and frequency translation is needed. The
device contains two internal PLL stages that are cascaded in
series. The first PLL stage uses a VCXO which is optimized to
provide reference clock jitter attenuation and to be jitter tolerant,
and to provide a stable reference clock for the 2nd PLL stage
(typically 19.44MHz). The second PLL stage provides additional
frequency multiplication (x32), and it maintains low output jitter by
using a low phase noise FemtoClock™VCO. PLL multiplication
ratios are selected from internal lookup tables using device input
selection pins. The device performance and the PLL multiplication
ratios are optimized to support non-FEC (non-Forward Error
Correction) SONET/SDH applications with rates up to OC-48
(SONET) or STM-16 (SDH). The VCXO requires the use of an
external, inexpensive pullable crystal. VCXO PLL uses external
passive loop filter components which are used to optimize the PLL
loop bandwidth and damping characteristics for the given
line card application.
• Maximum output frequency: 700MHz
• FemtoClock VCO frequency range: 560MHz - 700MHz
• RMS phase jitter @ 155.52MHz, using a 19.44MHz crystal
(12kHz to 20MHz): 0.81ps (typical)
• Full 3.3V or mixed 3.3V core/2.5V output operating supply
• -40°C to 85°C ambient operating temperature
• Available in both standard (RoHS 5) and lead-free (RoHS 6)
packages
Pin Assignment
The ICS843002I-41 includes two clock input ports. Each one can
accept either a single-ended or differential input. Each input port
also includes an activity detector circuit, which reports input clock
activity through the LOR0 and LOR1 logic output pins. The two
input ports feed an input selection mux. “Hitless switching” is
accomplished through proper filter tuning. Jitter transfer and
wander characteristics are influenced by loop filter tuning, and
phase transient performance is influenced by both loop filter
tuning and alignment error between the two reference clocks.
32 31 30 29 28 27 26 25
1
2
3
24
23
22
LF1
LF0
LOR0
LOR1
nc
ISET
Typical ICS843002I-41 configuration in SONET/SDH Systems:
• VCXO 19.44MHz crystal
VCC
VCCO_LVCMOS
VCCO_LVPECL
nQB
4
5
21
20
CLK0
nCLK0
CLK_SEL
QA_SEL2
6
7
8
19
18
17
QB
• Loop bandwidth: 50Hz - 250Hz
VEE
• Input Reference clock frequency selections:
19.44MHz, 38.88MHz, 77.76MHz, 155.52MHz, 311.04MHz,
622.08MHz
9
10 11 12 13 14 15 16
• Output clock frequency selections:
19.44MHz, 77.76MHz, 155.52MHz, 311.04MHz, 622.08MHz,
Hi-Z
ICS843002I-41
32-Lead VFQFN
5mm x 5mm x 0.925mm package body
K Package
Top View
IDT™ / ICS™ VCXO BASED SONET/SDH JITTER ATTENUATOR
1
ICS843002AKI-41 REV. A OCTOBER 25, 2007