74LV165A-Q100
8-bit parallel-in/serial-out shift register
Rev. 3 — 28 March 2014
Product data sheet
1. General description
The 74LV165A-Q100 is an 8-bit parallel-load or serial-in shift register with complementary
serial outputs (Q7 and Q7) available from the last stage. When the parallel-load input (PL)
is LOW, parallel data from the inputs D0 to D7 are loaded into the register asynchronously.
When input PL is HIGH, data enters the register serially at the input DS. It shifts one place
to the right (Q0 Q1 Q2, etc.) with each positive-going clock transition. This feature
allows parallel-to-serial converter expansion by tying the output Q7 to the input DS of the
succeeding stage. The clock input is a gate-OR structure which allows one input to be
used as an active LOW clock enable input (CE) input. The pin assignment for the inputs
CP and CE is arbitrary and can be reversed for layout convenience. The LOW-to-HIGH
transition of the input CE should only take place while CP HIGH for predictable operation.
Schmitt-trigger action at all inputs, makes the circuit tolerant for slower input rise and fall
times. It is fully specified for partial-power-down applications using IOFF. The IOFF circuitry
disables the output, preventing the damaging current backflow through the device when it
is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 3) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 3)
Specified from 40 C to +85 C
Wide supply voltage range from 2.0 V to 5.5 V
Synchronous parallel-to-serial applications
Synchronous serial input for easy expansion
Latch-up performance exceeds 250 mA
CMOS LOW power consumption
5.5 V tolerant inputs/outputs
Direct interface with TTL levels (2.7 V to 3.6 V)
Power-down mode
Complies with JEDEC standards:
JESD8-5 (2.3 V to 2.7 V)
JESD8B/JESD36 (2.7 V to 3.6 V)
JESD8-1A (4.5 V to 5.5 V)
ESD protection:
MIL-STD-833, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )