是否Rohs认证: | 符合 | 生命周期: | Transferred |
零件包装代码: | SOIC | 包装说明: | SOP, SOP14,.25 |
针数: | 14 | Reach Compliance Code: | compliant |
HTS代码: | 8542.39.00.01 | 风险等级: | 6.86 |
模拟集成电路 - 其他类型: | SPST | JESD-30 代码: | R-PDSO-G14 |
JESD-609代码: | e4 | 长度: | 8.65 mm |
湿度敏感等级: | 1 | 正常位置: | NO |
信道数量: | 1 | 功能数量: | 4 |
端子数量: | 14 | 标称断态隔离度: | 50 dB |
通态电阻匹配规范: | 5 Ω | 最大通态电阻 (Ron): | 142 Ω |
最高工作温度: | 125 °C | 最低工作温度: | -40 °C |
输出: | SEPARATE OUTPUT | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | SOP | 封装等效代码: | SOP14,.25 |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE |
峰值回流温度(摄氏度): | 260 | 电源: | 2/9 V |
认证状态: | Not Qualified | 座面最大高度: | 1.75 mm |
子类别: | Multiplexer or Switches | 最大供电电压 (Vsup): | 10 V |
最小供电电压 (Vsup): | 2 V | 标称供电电压 (Vsup): | 4.5 V |
表面贴装: | YES | 最长断开时间: | 45 ns |
最长接通时间: | 30 ns | 切换: | MAKE-BEFORE-BREAK |
技术: | CMOS | 温度等级: | AUTOMOTIVE |
端子面层: | Nickel/Palladium/Gold (Ni/Pd/Au) | 端子形式: | GULL WING |
端子节距: | 1.27 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | 30 | 宽度: | 3.9 mm |
Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
74HC4066D | NXP |
类似代替 |
Quad bilateral switches | |
CD74HC4053M96 | TI |
功能相似 |
High-Speed CMOS Logic Analog Multiplexers/Demultiplexers |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
74HC4066D/T3 | NXP |
获取价格 |
IC QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO14, 3.90 MM, PLASTIC, SOT-108-1, MS-012, | |
74HC4066DB | NXP |
获取价格 |
Quad bilateral switches | |
74HC4066DB,112 | NXP |
获取价格 |
74HC(T)4066 - Quad single-pole single-throw analog switch SSOP1 14-Pin | |
74HC4066DB,118 | NXP |
获取价格 |
74HC(T)4066 - Quad single-pole single-throw analog switch SSOP1 14-Pin | |
74HC4066D-Q100 | NEXPERIA |
获取价格 |
Quad single-pole single-throw analog switch | |
74HC4066D-T | NXP |
获取价格 |
IC QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO14, 3.90 MM, PLASTIC, SOT-108-1, MS-012, | |
74HC4066FT | TOSHIBA |
获取价格 |
Quad SPST(1:1)/Analog Switch, TSSOP14B | |
74HC4066N | PHILIPS |
获取价格 |
SPST, 4 Func, CMOS, PDIP14, | |
74HC4066N | NXP |
获取价格 |
Quad bilateral switches | |
74HC4066N,652 | NXP |
获取价格 |
74HC4066N |