5秒后页面跳转
74ALVC16244DTR PDF预览

74ALVC16244DTR

更新时间: 2024-11-04 23:24:03
品牌 Logo 应用领域
其他 - ETC 驱动器逻辑集成电路光电二极管
页数 文件大小 规格书
12页 137K
描述
Buffer/Driver

74ALVC16244DTR 数据手册

 浏览型号74ALVC16244DTR的Datasheet PDF文件第2页浏览型号74ALVC16244DTR的Datasheet PDF文件第3页浏览型号74ALVC16244DTR的Datasheet PDF文件第4页浏览型号74ALVC16244DTR的Datasheet PDF文件第5页浏览型号74ALVC16244DTR的Datasheet PDF文件第6页浏览型号74ALVC16244DTR的Datasheet PDF文件第7页 
74ALVC16244  
Low-Voltage 1.8/2.5/3.3 V  
16-Bit Buffer  
With 3.6 V–Tolerant Inputs and Outputs  
(3–State, Non–Inverting)  
The 74ALVC16244 is an advanced performance, non–inverting  
16–bit buffer. It is designed for very high–speed, very low–power  
operation in 1.8 V, 2.5 V or 3.3 V systems.  
The 74ALVC16244 is nibble controlled with each nibble  
functioning identically, but independently. The control pins may be  
tied together to obtain full 16–bit operation. The 3–state outputs are  
controlled by an Output Enable (OEn) input for each nibble. When  
OEn is LOW, the outputs are on. When OEn is HIGH, the outputs are  
in the high impedance state.  
http://onsemi.com  
MARKING DIAGRAM  
48  
48  
74ALVC16244DT  
AWLYYWW  
1
TSSOP–48  
DT SUFFIX  
CASE 1201  
Designed for Low Voltage Operation: V = 1.65–3.6 V  
3.6 V Tolerant Inputs and Outputs  
CC  
1
High Speed Operation: 3.0 ns max for 3.0 to 3.6 V  
3.7 ns max for 2.3 to 2.7 V  
A
= Assembly Location  
6.0 ns max for 1.65 to 1.95 V  
WL = Wafer Lot  
YY = Year  
WW = Work Week  
Static Drive: ±24 mA Drive at 3.0 V  
±12 mA Drive at 2.3 V  
±4 mA Drive at 1.65 V  
Supports Live Insertion and Withdrawal  
I  
Specification Guarantees High Impedance When V = 0 V  
OFF  
CC  
ORDERING INFORMATION  
Near Zero Static Supply Current in All Three Logic States (40 mA)  
Substantially Reduces System Power Requirements  
Device  
Package  
Shipping  
2500/Tape & Reel  
74ALVC16244DTR TSSOP  
Latchup Performance Exceeds ±250 mA @ 125°C  
ESD Performance: Human Body Model >2000 V;  
Machine Model >200 V  
Second Source to Industry Standard 74ALVC16244  
To ensure the outputs activate in the 3–state condition, the output enable pins  
should be connected to V through a pull–up resistor. The value of the resistor is  
CC  
determined by the current sinking capability of the output connected to the OE pin.  
Semiconductor Components Industries, LLC, 2002  
1
Publication Order Number:  
July, 2002 – Rev. 0  
74ALVC16244/D  

与74ALVC16244DTR相关器件

型号 品牌 获取价格 描述 数据表
74ALVC16244GX FAIRCHILD

获取价格

Low Voltage 16-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs
74ALVC16244MTD FAIRCHILD

获取价格

Low Voltage 16-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs
74ALVC16244MTD ONSEMI

获取价格

Low Voltage 1.8/2.5/3.3V 16-Bit Buffer
74ALVC16244MTDX FAIRCHILD

获取价格

Low Voltage 16-Bit Buffer/Line Driver with 3.6V Tolerant Inputs and Outputs
74ALVC16244MTDX ONSEMI

获取价格

Low Voltage 1.8/2.5/3.3V 16-Bit Buffer
74ALVC16245 FAIRCHILD

获取价格

Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs
74ALVC16245 NXP

获取价格

2.5V/3.3V 16-bit bus transceiver with direction pin 3-State
74ALVC16245 RENESAS

获取价格

3.3V CMOS 16-Bit Bus Transceiver with 3-State Outputs
74ALVC16245/D ETC

获取价格

Low-Voltage 1.8/2.5/3.3 V 16-Bit Transceiver
74ALVC16245_05 FAIRCHILD

获取价格

Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs