3PMT5.0A thru 3PMT170A
POWERMITE®
Low Profile 1500 Watt
S C O T T S D A L E D I V I S I O N
Transient Voltage Suppressor
DESCRIPTION
APPEARANCE
These 1500 watt transient voltage suppressors offer power-handling capabilities
only found in larger packages. They are most often used for protecting against
transients from inductive switching environments or induced secondary lightning
effects as found in lower surge levels of IEC61000-4-5. With very fast response
times, they are also effective in protection from ESD or EFT. Powermite® package
features include a full-metallic bottom that eliminates the possibility of solder-flux
entrapment during assembly. They also provide unique locking tabs acting as an
integral heat sink. With its very short terminations, parasitic inductance is minimized
to reduce voltage overshoots during fast-rise-time transients.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
•
•
Very low profile surface mount package (1.1mm)
•
•
•
•
Secondary lightning transient protection
Integral heat-sink-locking tabs
Inductive switching transient protection
Small footprint
Compatible with automatic insertion equipment
Full-metallic bottom eliminates flux entrapment
Voltage range 5 volts to 170 volts
Very low parasitic inductance for minimal
voltage overshoot
•
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively and
IEC61000-4-5 for surge levels defined herein
Available in both unidirectional or bidirectional
(CA suffix for bidirectional)
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
1500 Watt peak pulse power (10 / 1000 µs)
Forward Surge Current: 200 Amps at 8.3 ms
(excluding bidirectional)
•
•
Terminals: All terminals are tin-lead plated
Polarity: Two-leads on side are internally connected
together for anode and backside is cathode
(unidirectional devices only)
•
Marking: Body marked with P/N without 3PMT
prefix
•
•
Repetition surge rate (duty factor): 0.01%
Thermal resistance: 2.5°C / watt junction to tab
130°C / watt junction to ambient with
recommended footprint
(ie. 5.0A, 5.0CA, 12A, 12CA, 170A, 170CA, etc.)
Molded epoxy package meets UL94V-0
Weight: 0.072 grams (approximate)
Tape & Reel packaging per EIA-481-2
(16 mm - 6000 units/reel)
•
•
•
•
Lead and mounting temperature: 260°C for 10 s
ELECTRICAL CHARACTERISTICS
BREAKDOWN
CLAMPING
VOLTAGE
VC
PEAK PULSE
CURRENT
IPP
STANDBY
CURRENT
ID
TEMPERATURE
COEFFICIENT
OF VBR
STANDOFF
VOLTAGE
VOLTAGE
VBR
MICROSEMI
VWM
@1 mA
@ IPP
@ VWM
PART NUMBER
(FIGURE 4)
VOLTS
MAX
(FIGURE 4)
AMPS
αV(BR)
%/°C
MAX
VOLTS
VOLTS
MIN
µA
MAX
3PMT5.0A
3PMT6.0A
3PMT6.5A
3PMT7.0A
3PMT7.5A
3PMT8.0A
3PMT8.5A
3PMT9.0A
3PMT10A
3PMT11A
3PMT12A
5
6
6.5
7
7.5
8
8.5
9.0
10
11
12
6.40
6.67
7.22
7.78
8.33
8.89
9.94
10.0
11.1
12.2
13.3
9.2
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
1000
1000
500
200
100
50
25
10
5
5
.057
.059
.061
.065
.067
.070
.073
.076
.078
.081
.082
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
88.2
82.4
75.3
5
Copyright 2003
Microsemi
Page 1
10-6-2003 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503