3PMT5.0 thru 3PMT170
POWERMITE®
1500 Watt Transient Absorption Zener
S C O T T S D A L E D I V I S I O N
DESCRIPTION
POWERMITE ®
These 1500 watt transient voltage suppressors offer power-handling capabilities only
found in larger packages. They are most often used for protecting against transients
from inductive switching environments or induced secondary lightning effects as
found in lower surge levels of IEC61000-4-5. With very fast response times, they are
also effective in protection from ESD or EFT. Powermite® package features include a
full metallic bottom that eliminates the possibility of solder-flux entrapm ent during
assembly. They also provide unique locking tab acting as an integral heat sink. With
its very short terminations, parasitic inductance is minimized to reduce voltage
overshoots during fast-rise-time transients.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEF ITS
·
·
·
·
·
·
Very low profile surface mount package (1.1mm)
Integral heat sink-locking tabs
Compatible with automatic insertion equipment
Full metallic bottom eliminates flux entrapment
Voltage range 5 volts to 170 volts
· Secondary lightning transient protection
· Inductive switching transient protection
· Small footprint
· Very low parasitic inductance for minimal
voltage overshoot
· Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively and
Available in both unidirectional or bi-directional
(C suffix for bi-directional)
IEC61000-4-5 for surge levels defined herein
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
·
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
1500 Watt peak pulse power (10 / 1000 µsec.)
Forward Surge Current: 200 Amps (8.3 ms)
(excluding bidirectional)
Repetition surge rate (duty factor): 0.01%
Lead and mounting temperature: 260°C for 10 sec
· Terminals tin-lead plated
·
·
·
· Two-lead side internally connected together
· Cathode designated with band (unidirectional)
· Molded epoxy package meets UL94V-0
· Weight: 0.072 grams (approximate)
· Thermal resistance: 2.5°C / watt junction to tab
130°C / watt junction to ambient with
recommended footprint
·
·
· Tape & Reel packaging per EIA-481-2
(16 mm - 6000 units/reel)
PEAK PULSE POWER RATI N G S
100
10
100
75
50
1.0
.10
25
0
0
50 100 150 200
100ns
1µs
10µs
100µs
1ms
10ms
T – Temperature – ºC
td – Pulse Time – sec
Copyright ã 2001
MSCXXXX.PDF 09-09 2002 REV 0
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503