5秒后页面跳转
1S7E_0303S3UP PDF预览

1S7E_0303S3UP

更新时间: 2024-09-14 02:43:55
品牌 Logo 应用领域
GAPTEC /
页数 文件大小 规格书
4页 1243K
描述
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated

1S7E_0303S3UP 数据手册

 浏览型号1S7E_0303S3UP的Datasheet PDF文件第2页浏览型号1S7E_0303S3UP的Datasheet PDF文件第3页浏览型号1S7E_0303S3UP的Datasheet PDF文件第4页 
1S7E_3UP Series  
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated  
DC-DC Converter  
1 Watt  
The 1S7E_3UP series is specially designed for applications where an isolated vol-  
Miniature SIP package  
Conversion efficiency high  
up to 81%  
3000VDC isolation voltage  
Internal SMD construction  
Operating temperature:  
-40°C to +105°C  
tage is required in a distributed power supply system.  
Industry standard pinout  
RoHS compliance  
These products apply to:  
1) Where the voltage of the input power supply is stable  
(voltage variation ≤ 10ꢀ)  
Short circuit protection (SCP)  
EN60950, UL60950 approval  
2) Where isolation is necessary between input and output  
(isolation voltage ≤3000VDC)  
3) Where the regulation of the output voltage and the output ripple noise are  
not demanding  
Such as: pure digital circuits, low frequency analog circuits and relay-driven  
circuits, etc.  
UL-60950-1 (E347551)  
Common specifications  
Output specifications  
Short circuit protection*:  
Continuous, Auto-recovery  
Item  
Test condition  
Min  
Typ  
1.1  
Max  
1.5  
Units  
1sec for the following models:  
1S7E_0524S3UP /1S7E_0524D3UP  
1S7E_24xxS3UP / 1S7E_24xxD3UP  
Output voltage  
accuracy  
Follow the tolerance  
envelope graph  
Line regulation  
For Vin change of 1ꢀ  
• 3.3VDC output  
• other output  
Temperature rise at full load:  
Cooling:  
30°C MAX, 20°C TYP  
Free air convection  
Operation temperature range:  
-40°C~+105°C  
Load regulation  
10ꢀ to 100ꢀ load  
• 3.3VDC output  
• 5VDC output  
• 9VDC output  
• 12VDC output  
• 15VDC output  
• 24VDC output  
Derating if the temperature ≥85°C  
18  
12  
9
Storage temperature range:  
Casing temperature rise:  
Lead temperature:  
-55°C ~+125°C  
8
25°C TYP, Ta=25°C  
300°C MAX, 1.5mm from case for 10 sec  
< 95ꢀ  
7
6
Storage humidity range:  
Package material:  
Temperature drift  
Ripple & Noise*  
100ꢀ full load  
• 3.3 / 5 / 9 / 12VDC  
• 15 / 24VDC  
0.03  
ꢀ/°C  
Plastic [UL94-V0]  
>3,500 Khours  
2.4g  
MTBF (MIL-HDFK-217F@25°C):  
Weight:  
20MHz Bandwidth  
100  
100  
200  
mVp-  
p
Switching fre-  
quency  
Full load, nominal  
input  
KHz  
*Supply voltage must be discontinued at the end of short circuit duration for  
the models 1S7E_0524S3UP/1S7E_0524D3UP and 1S7E_24xxS3UP/ 1S7E_24xxD3UP  
models.  
EMC specifications  
Input specifications  
EMI  
EMI  
EMS  
Conducted  
disturbance  
CISPR22/EN55022 CLASS B  
(see EMC typical recommended circuit)  
Item  
Test condition  
Min  
Typ  
Max  
Units  
Radiated emission CISPR22/EN55022 CLASS B  
(see EMC typical recommended circuit)  
Input current  
(Full load/no load)  
• 3.3V Input  
• 5V input  
• 9V input  
• 12V input  
• 15V input  
• 24V input  
415/25  
274/20  
139/20  
114/15  
84/10  
58/7  
–/70  
–/60  
–/55  
–/50  
–/35  
–/30  
mA  
mA  
mA  
mA  
mA  
mA  
Electrostatic  
discharge  
• 1S7E_S3  
IEC/EN61000-4-2 Contact 6KV perf. Criteria B  
IEC/EN61000-4-2 Contact 8KV perf. Criteria B  
• 1S7E_D3  
Surge voltage  
(1sec. max.)  
• 3.3V Input  
• 5V input  
• 9V input  
• 12V input  
• 15V input  
• 24V input  
-0.7  
-0.7  
-0.7  
-0.7  
-0.7  
-0.7  
5
VDC  
VDC  
VDC  
VDC  
VDC  
VDC  
9
Example:  
1S7E_0505D3UP  
12  
18  
21  
30  
1 = 1Watt; S7 = SIP7; E = series; 5Vin; 5Vout; D = Dual Output;  
3 = 3kVDC; U = Unregulated Output; P = Short Circuit Protection  
Input filter  
Hot plug  
Capacitor filter  
Unavailable  
Note:  
1. Operation under minimum load will not damage the converter; However, they  
may not meet all specification listed, and that will reduce the life of product.  
2. All specifications measured at Ta = 25°C, humidity <75ꢀ, nominal input voltage  
and rated output load unless otherwise specified.  
Isolation specifications  
Item  
Test condition  
Min  
Typ  
20  
Max  
Units  
VDC  
3. In this datasheet, all the test methods of indications are based on corporate  
standards.  
Isolation voltage  
Tested for 1 minute  
and 1mA max  
3000  
4. Only typical models listed, other models may be different, please contact our  
technical person for more details.  
Isolation resistance  
Test at 500VDC  
1000  
MΩ  
pF  
Isolation Capacitance 100KHz/0.1V  
Page 1 of 4  
1S7E_3UP – Rev. 2020-2.5  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  

与1S7E_0303S3UP相关器件

型号 品牌 获取价格 描述 数据表
1S7E_0305S1.5UP GAPTEC

获取价格

1W - Dual/Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0305S3UP GAPTEC

获取价格

1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0312D3UP GAPTEC

获取价格

1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0324S3UP GAPTEC

获取价格

1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0503D1.5UP GAPTEC

获取价格

1W - Dual/Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0503S1.5UP GAPTEC

获取价格

1W - Dual/Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0503S3UP GAPTEC

获取价格

1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0505D1.5UP GAPTEC

获取价格

1W - Dual/Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0505D3UP GAPTEC

获取价格

1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
1S7E_0505S1.5UP GAPTEC

获取价格

1W - Dual/Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated