1S7E_3UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
1 Watt
The 1S7E_3UP series is specially designed for applications where an isolated vol-
Miniature SIP package
Conversion efficiency high
up to 81%
3000VDC isolation voltage
Internal SMD construction
Operating temperature:
-40°C to +105°C
tage is required in a distributed power supply system.
Industry standard pinout
RoHS compliance
These products apply to:
1) Where the voltage of the input power supply is stable
(voltage variation ≤ 10ꢀ)
Short circuit protection (SCP)
EN60950, UL60950 approval
2) Where isolation is necessary between input and output
(isolation voltage ≤3000VDC)
3) Where the regulation of the output voltage and the output ripple noise are
not demanding
Such as: pure digital circuits, low frequency analog circuits and relay-driven
circuits, etc.
UL-60950-1 (E347551)
Common specifications
Output specifications
Short circuit protection*:
Continuous, Auto-recovery
Item
Test condition
Min
Typ
1.1
Max
1.5
Units
ꢀ
1sec for the following models:
1S7E_0524S3UP /1S7E_0524D3UP
1S7E_24xxS3UP / 1S7E_24xxD3UP
Output voltage
accuracy
Follow the tolerance
envelope graph
Line regulation
For Vin change of 1ꢀ
• 3.3VDC output
• other output
Temperature rise at full load:
Cooling:
30°C MAX, 20°C TYP
Free air convection
Operation temperature range:
-40°C~+105°C
Load regulation
10ꢀ to 100ꢀ load
• 3.3VDC output
• 5VDC output
• 9VDC output
• 12VDC output
• 15VDC output
• 24VDC output
Derating if the temperature ≥85°C
18
12
9
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Storage temperature range:
Casing temperature rise:
Lead temperature:
-55°C ~+125°C
8
25°C TYP, Ta=25°C
300°C MAX, 1.5mm from case for 10 sec
< 95ꢀ
7
6
Storage humidity range:
Package material:
Temperature drift
Ripple & Noise*
100ꢀ full load
• 3.3 / 5 / 9 / 12VDC
• 15 / 24VDC
0.03
ꢀ/°C
Plastic [UL94-V0]
>3,500 Khours
2.4g
MTBF (MIL-HDFK-217F@25°C):
Weight:
20MHz Bandwidth
100
100
200
mVp-
p
Switching fre-
quency
Full load, nominal
input
KHz
*Supply voltage must be discontinued at the end of short circuit duration for
the models 1S7E_0524S3UP/1S7E_0524D3UP and 1S7E_24xxS3UP/ 1S7E_24xxD3UP
models.
EMC specifications
Input specifications
EMI
EMI
EMS
Conducted
disturbance
CISPR22/EN55022 CLASS B
(see EMC typical recommended circuit)
Item
Test condition
Min
Typ
Max
Units
Radiated emission CISPR22/EN55022 CLASS B
(see EMC typical recommended circuit)
Input current
(Full load/no load)
• 3.3V Input
• 5V input
• 9V input
• 12V input
• 15V input
• 24V input
415/25
274/20
139/20
114/15
84/10
58/7
–/70
–/60
–/55
–/50
–/35
–/30
mA
mA
mA
mA
mA
mA
Electrostatic
discharge
• 1S7E_S3
IEC/EN61000-4-2 Contact 6KV perf. Criteria B
IEC/EN61000-4-2 Contact 8KV perf. Criteria B
• 1S7E_D3
Surge voltage
(1sec. max.)
• 3.3V Input
• 5V input
• 9V input
• 12V input
• 15V input
• 24V input
-0.7
-0.7
-0.7
-0.7
-0.7
-0.7
5
VDC
VDC
VDC
VDC
VDC
VDC
9
Example:
1S7E_0505D3UP
12
18
21
30
1 = 1Watt; S7 = SIP7; E = series; 5Vin; 5Vout; D = Dual Output;
3 = 3kVDC; U = Unregulated Output; P = Short Circuit Protection
Input filter
Hot plug
Capacitor filter
Unavailable
Note:
1. Operation under minimum load will not damage the converter; However, they
may not meet all specification listed, and that will reduce the life of product.
2. All specifications measured at Ta = 25°C, humidity <75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
Isolation specifications
Item
Test condition
Min
Typ
20
Max
Units
VDC
3. In this datasheet, all the test methods of indications are based on corporate
standards.
Isolation voltage
Tested for 1 minute
and 1mA max
3000
4. Only typical models listed, other models may be different, please contact our
technical person for more details.
Isolation resistance
Test at 500VDC
1000
MΩ
pF
Isolation Capacitance 100KHz/0.1V
Page 1 of 4
1S7E_3UP – Rev. 2020-2.5
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com