1N6471HRS

更新时间： 2024-11-24 13:03:43

品牌	Logo	应用领域
美高森美 - MICROSEMI		瞬态抑制器二极管局域网
页数	文件大小	规格书
3页	312K
描述
Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon,

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

1N6471HRS 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Active	包装说明：	O-LALF-W2
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8541.10.00.50	风险等级：	5.6
其他特性：	TEMPERATURE COEFFICIENT IS DERIVED FROM MINIMUM BREAK-DOWN VOLTAGE, HIGH RELIABILITY	最小击穿电压：	13.6 V
外壳连接：	ISOLATED	配置：	SINGLE
二极管元件材料：	SILICON	二极管类型：	TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 代码：	O-LALF-W2	JESD-609代码：	e0
最大非重复峰值反向功率耗散：	1500 W	元件数量：	1
端子数量：	2	封装主体材料：	GLASS
封装形状：	ROUND	封装形式：	LONG FORM
峰值回流温度（摄氏度）：	NOT SPECIFIED	极性：	UNIDIRECTIONAL
最大功率耗散：	3 W	认证状态：	Not Qualified
最大重复峰值反向电压：	12 V	表面贴装：	NO
技术：	AVALANCHE	端子面层：	TIN LEAD
端子形式：	WIRE	端子位置：	AXIAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	Base Number Matches：	1

1N6471HRS 数据手册

1N6469US thru 1N6476US

Voidless-Hermetically-Sealed Surface

Mount Unidirectional Transient

Suppressors

S C O T T S D A L E D I V I S I O N

DESCRIPTION

APPEARANCE

This surface mount series of industry recognized voidless-hermetically-sealed

Unidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MIL-

PRF-19500/552 and are ideal for high-reliability applications where a failure cannot be

tolerated. They provide a Working Peak “Standoff” Voltage selection from 5.0 to 51.6

Volts with 1500 W ratings. They are very robust in hard-glass construction and also

use an internal metallurgical bond identified as Category I for high reliability

applications. The 1500 W series is military qualified to MIL-PRF-19500/552. These

devices are also available in axial-leaded packages for thru-hole mounting by deleting

the “US” suffix (see separate data sheet for 1N6469 thru 1N6476A). Microsemi also

offers numerous other TVS products to meet higher and lower peak pulse power and

voltage ratings in both through-hole and surface-mount packages.

Package “G”

(or “D-5C”)

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

High surge current and peak pulse power provides

•

Military and other high reliability transient protection

Extremely robust construction

transient voltage protection for sensitive circuits

•

Triple-layer passivation

Internal “Category I” metallurgical bonds

Voidless hermetically sealed glass package

JAN/TX/TXV military qualifications available per MIL-

PRF-19500/552 by adding JAN, JANTX, or JANTXV

prefix

Further options for screening in accordance with MIL-

PRF-19500 for JANS by using a “MSP” prefix, e.g.

MSP6469, MSP6476, etc.

Working Peak “Standoff” Voltage (V_WM) from 5.0 to

51.6 V

•

Available as 1500 W Peak Pulse Power (P_PP)

ESD and EFT protection per IEC61000-4-2 and

IEC61000-4-4 respectively

•

Secondary lightning protection per select levels in

IEC61000-4-5

Square-end-cap terminals for easy mounting

•

Nonsensitive to ESD per MIL-STD-750 Method

Axial-leaded equivalents are also available (see

1020

separate data sheet for 1N6469 thru 1N6476)

•

Inherently radiation hard as described in Microsemi

MicroNote 050

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

•

Operating & Storage Temperature: -55^oC to +175^oC

•

CASE: Hermetically sealed voidless hard glass

Peak Pulse Power at 25^oC: 1500 Watts @ 10/1000 µs

(also see Figures 1,2 and 4)

Impulse repetition rate (duty factor): 0.01%

with Tungsten slugs

TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)

over copper

MARKING: Body painted and part number, etc.

POLARITY: Cathode band

Tape & Reel option: Standard per EIA-481-B

Weight: 1100 mg

See package dimensions on last page

•

Forward Surge Current: 130 Amps@ 8.33 ms one-

half sine wave

•

Forward Voltage: 1.5 V @ 4 Amps dc and 4.8 V at

100 Amps (pulsed)

Steady-State Power: 3.0 W @ T_A= 25^oC (see note

below and Figure 4)

•

Thermal Resistance Junction to End Cap: 20.0 ^oC/W

Solder Temperatures: 260^oC for 10 s (maximum)

NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from

mounting point to ambient is sufficiently controlled where T_J(MAX)is not exceeded.

11-01-2004 REV A

Microsemi

Scottsdale Division

Page 1

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

12 3

中文翻译

下载PDF

与1N6471HRS相关器件

型号	品牌	获取价格	描述	数据表
1N6471HRX	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 1500W, 12V V(RWM), Unidirectional, 1 Element, Silicon,
1N647-1R	MICROSEMI	获取价格	Rectifier Diode, 1 Element, 0.4A, Silicon, GLASS PACKAGE-2
1N6471US	SENSITRON	获取价格	Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, MELF-2
1N6471US	MICROSEMI	获取价格	VOIDLESS HERMETICALLY SEALED SURFACE MOUNT UNDIRECTIONAL TRANSIENT SUPPRESSORS
1N6471US	SEMTECH	获取价格	QPL 1500 Watt Surface Mount TVS
1N647-1X	MICROSEMI	获取价格	暂无描述
1N6472	MICROSEMI	获取价格	TRANSIENT SUPPRESSORS
1N6472	SEMTECH	获取价格	QPL 1500 Watt Axial Leaded TVS
1N6472.TR	SEMTECH	获取价格	Trans Voltage Suppressor Diode, 1500W, 15V V(RWM), Unidirectional, 1 Element, Silicon
1N6472HR	MICROSEMI	获取价格	暂无描述

与1N6471HRS相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

39
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

31
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

59
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

55

产品中心

服务支持

精选活动

关于我们

帮助中心

1N6471HRS

1N6471HRS 技术参数

1N6471HRS 数据手册

与1N6471HRS相关器件

与1N6471HRS相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1N6471HRS

1N6471HRS 技术参数

1N6471HRS 数据手册

与1N6471HRS相关器件

与1N6471HRS相关文章

您还可以找

您在本页遇到什么问题？