150ACMEA Series
150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
150 Watt
EMI for Both Class I (with PE)
and Class II (without PE)
Over voltage protection (OVP)
Meets EN60950, UL60950
UL / IEC / EN 60601 3.1
Edition & UL / IEC / EN 60950
AM2 Safety Approvals
Meets EN60601-1, ANSI/
AAMI ES60601-1 standards
(2 x MOOP)
The 150ACMEA series is a compact size power converter offered by
GAPTEC. It features universal input voltage, taking both DC and AC
input voltage, low power consumption, high efficiency, high reliability,
safer isolation. It offers good EMC performance, meets IEC/EN61000-4,
CISPR22/EN55022, UL60950 and EN60950 standards, and is widely used
in medical instrumentation and critical applications in commercial and
industrial electronic equipment.
High efficiency up to 93.5%
Plastic case, meets UL94V-0
Short circuit protection (SCP)
Output power protection (OPP)
With PFC Function >0.9
<0.3W No Load Input Power
(pending)
Approval
Model
Power
[W]
Output voltage
[V]
Output current
[A, max]
Capacitive Load
[µF, max]
Efficiency*
[@230VAC, %, typ]
UL/CE
UL/CE
UL/CE
UL/CE
150ACMEA_12S4
150ACMEA_15S4
150ACMEA_24S4
150ACMEA_48S4
150
150
150
150
12
15
12.5
10
6000
5000
2000
330
93
93
24
48
6.25
3.125
93.5
93.5
* After 30 minutes of burn-in
Input specifications
Input voltage range
Input frequency
Input current
Output specifications
90-264 VAC (see derating curve)
47~63Hz
Item
Test conditions
Min Typ
2
Max
Units
%
Output voltage
accuracy
Full load
115VAC
• 2.5A (max)
230VAC
• 1.25A (max)
Line regulation
Load regulation
Ripple & noise*
Hold-up time
1
1
%
%
Inrush current
(<2ms)
115VAC
• 45A (typ)
230VAC
• 90A (typ)
10% to 100% load
1% of Vout
Leakage current
Power factor
< 0.1mA/264VAC (touch current)
PF>0.9 at full load
@90% Vout/115VAC
10
ms
* Measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
Protection specifications
Short circuit
protection
Protection type:
Auto recovery, hiccup mode
Example:
150ACMEA_05S4
150 = 1050Watt; AC = AC-DC; MEA = series; 5Vout; S = Single
Output; 4 = 4kVAC
Over-voltage
protection
Protection type:
Auto recovery
Over-power
protection
Protection type:
Auto recovery, hiccup mode
Note:
Over-temperature
protection
Protection type:
Auto recovery
1. This product is not designed for use in critical life support systems, equipment
used in hazardous environment, nuclear control systems or other such
applications which necessitate specific safety and regulatory standards other
the ones listed in this datasheet.
2. All specifications valid at 230VAC input voltage, full load and +25°C after
warm-up time unless otherwise stated.
Page 1 of 3
150ACMEA – Rev. 2017-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com