150ACPM_SC Series
150W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
150 Watt
The 150ACPM_SC series features standard rail mounting, energy efficien-
cy and is highly cost-effective. The series offers stability and high noise
immunity especially for industrial control equipment, machinery and
other demanding environments for industrial equipment. This converter
offers a compact and light weight design with and standard rail installation
(35mm). Furthermore this series offers Easy Fuse Tripping due and a
built-in DC OK relay contact. The converter can be installed on TS-35/7.5
or TS-35/15.
High efficiency up to 87%
Universal AC input range
(85~264VAC)
Built-in Active PFC function,
PF>0.95
Over power protection (OPP)
Over load protection (OLP)
Short circuit protection (SCP)
Wide operating ambient
temperature (-20°C~70°C)
Withstand 300VA surge input
for 5 secs.
100% full load burn-in test
Easy assembling from top side
All using 105°C long life
electrolytic capacitors
pending
Common specifications
Short circut protection:
Temperature rise at full load:
Cooling:
Input specifications
Long-term mode, automatic recovery
40°C MAX
Input voltage range
Input frequency
Power factor
85~264VAC, 120~370Vdc
47~63Hz
Free air convection
-20°C~+70°C
115VAC
230VAC
• 0.98 (typ)
• 0.95 (typ)
Operation temperature range:
Storage temperature range:
Storage humidity range:
Temperature coefficient:
MTBF (using MIL-HDBK-217F):
Power boost:
AC current
2A (max)
-30°C ~+85°C
Inrush current
Cold start
115VAC
230VAC
< 95%
• 30A (typ)
• 45A (typ)
0.03%/°C MAX
Leakage current
(input 264Vac, 63Hz)
Input—output: ≤0.25mA
Input—PG: ≤3.5mA
+25°C >200,000 hours
150% of rated current
support
Output specifications
Parallel function:
Item
Test conditions
Full load
Min
Typ
Max
2
Units
%
Safety standards:
UL60950-1 2nd Ed; IEC 60950-
1:2005(2nd Ed); EN60950-1:2006
Output voltage
accuracy
Case material:
Heat-resistant Plastic (UL94-V0) and
metal
Voltage adjustment
range
• 12V
• 15V
• 24V
• 48V
10.8
13.5
21.6
43.2
13.2
16.5
26.4
52.8
V
V
V
V
Dimensions:
Weight:
199*99*38mm
750g
Line regulation
Load regulation
Set-up time
Vin= min. to max. at
full load
0.5
%
Isolation specifications
• 12V, 15V
• 24V, 48V
2
1
%
%
Item
Test condition
Min
Typ
Max
Units
VAC
Withstand voltage*
• Primary-Sec.: 10mA
• Primary-PG: 10mA
• Secondary-PG: 10mA 500
3000
1500
• @230VAC input
• @115VAC input
2
3
s
s
Hold-up time
10
ms
%
Isolation resistance
100
MΩ
Overshoot and
undershoot
5
* Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA
Switching frequency
100
KHz
Protection specifications
* Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated
with a 0.1 uF & 10uF parallel capacitor.
Over-load
protection
• 12V: 13.125~18.75A Protection type:
• 15V: 10.5~17A
• 24V: 6.93~9.45A
• 48V: 3.36~4.8A
Constant power, auto recovery
Example:
150ACPM_24SC
Over-power
protection
• 12V: 160~225W
• 15V: 160~255W
• 24V: 160~225W
• 48V: 160~225W
Protection type:
Constant power, auto recovery
150= 150Watt
AC= AC-DC
PM= series
24= 24 Vout
S= single output
C= PFC (Power Factor Correction)
Over-voltage
protection
• 12V: 14~18V
• 15V: 17.8~22.5V
• 24V: 27~36V
Protection type:
Constant power, auto recovery
• 48V: 52.5~72V
Over-temperature
protection
105°C +5°C (detect on Mosfet temperature); shut down,
auto recovery after the temperature goes down to 50°C
Note:
1. All parameters NOT specially mentioned are measured at rated input, rated load
and 25°C of ambient temperature.
Page 1 of 4
150ACPM_SC – Rev. 2017-1.0
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
Specifications subject to change without notice.