XS3A1T5157
Low-ohmic single-pole double-throw analog switch
Rev. 1 — 17 March 2020
Product data sheet
1. General description
The XS3A1T5157 is a low-ohmic single-pole double-throw analog switch suitable for use as an
analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent
inputs/outputs (Y1 and Y2) and a common input/output (Z).
Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall
times. Low threshold digital input allows this device to be driven by 1.8 V logic levels in 3.3 V
applications without significant increase in supply current ICC. This makes it possible for the
XS3A1T5157 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic
level translation. The XS3A1T5157 allows signals with amplitude up to VCC to be transmitted from
Z to Y1 or Y2, or from Y1 or Y2 to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures
minimal attenuation and distortion of transmitted signals.
2. Features and benefits
•
•
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
•
•
•
•
•
1.6 Ω (typical) at VCC = 1.4 V
1.0 Ω (typical) at VCC = 1.65 V
0.55 Ω (typical) at VCC = 2.3 V
0.50 Ω (typical) at VCC = 2.7 V
0.50 Ω (typical) at VCC = 4.3 V
•
•
•
Break-before-make switching
High noise immunity
ESD protection:
•
•
•
HBM ANSI/ESDA/JEDEC JS-001 exceeds 8000 V
CDM ANSI/ESDA/JEDEC JS-002 exceeds 1000 V
IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
•
•
•
•
•
•
•
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78 Class II Level A
Low-switching threshold levels
Control input accepts voltages above supply voltage
Very low supply current, even when input is below VCC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C