1
Optoway
XPS-2340WG
***********************************************************************************************************************************************************************
XPS-2340WG / XPS-2340BWG / XPS-2340AWG
(RoHS Compliant)
10Gbps / 40km / 1550 nm XFP Single-Mode Optical Transceiver for 10GbE / 10G FC
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps
l Complaint with XFP MSA
XPS-2340WG series transceiver is designed for
single-mode fibre serial optical data communications such as
10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel.
The transceiver consists of two sections: The transmitter
section consists of a temperature-stabilized 1550 nm
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
l Compliant with XFI 10G Serial Electrical Interface
l Maximum Link Length of 40 km
l Temperature-stabilized 1550 nm EML Transmitter
l 2-Wire Interface for Integrated Digital Diagnostic
Monitoring
l XFI Loopback Mode
l No reference Clock required
l Power Dissipation < 3.5 W
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
l Dual 5V and +3.3 V Power Supply
l RoHS-6 Compliant
l -5 to 70oC Operating: XPS-2340WG
l -5 to 85oC Operating: XPS-2340BWG
l -40 to 85oC Operating: XPS-2340AWG
APPLICATIONS
l 10GBASE-ER/EW
l 40 km 10G Fibre Channel
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10GBASE Distance
(km)
Wavelength
(nm)
Package
Case Temp
(oC)
RoHS
Compliant
Yes
XPS-2340WG
XPS-2340BWG
XPS-2340AWG
9.95 – 10.5
9.95 – 10.5
9.95 – 10.5
ER/EW
ER/EW
ER/EW
40
40
40
1550 EML
1550 EML
1550 EML
XFP with DMI
XFP with DMI
XFP with DMI
-5 to 70
-5 to 85
-40 to 85
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
85
Units
Notes
Storage Temperature
Tstg
Topr
-40
-5
oC
oC
Operating Case Temperature
70
XPS-2340WG
-5
85
XPS-2340BWG
XPS-2340AWG
Non condensing
-40
0
85
Relative Humidity
RH
85
%
V
Power Supply Voltage (5V)
Power Supply Voltage (3.3V)
Receiver Input Optical Power
Vcc5
-0.5
-0.5
6.0
3.6
4
VCC3
V
Mip
dBm
Received average power
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2009 V2.0