1
Optoway
XPS-2340MWG
***********************************************************************************************************************************************************************
XPS-2340MWG / XPS-2340BMWG / XPS-2340AMWG
(RoHS Compliant)
40km / 1550 nm / 10G Multirate XFP Single-Mode Optical Transceiver
**********************************************************************************************************************************************************************
FEATURES
l Support 9.95 Gbps to 11.3 Gbps
l Complaint with XFP MSA
DESCRIPTION
XPS-2340MWG series transceiver is designed for
single-mode fibre serial optical data communications such as
l Compliant with XFI 10G Serial Electrical Interface
l Maximum Link Length of 40 km
l Temperature-stabilized 1550 nm 800ps/nm EML
Transmitter
l 2-Wire Interface for Integrated Digital Diagnostic
Monitoring
l XFI Loopback Mode
l No reference Clock required
l Power Dissipation < 3.5 W
SONET OC-192
10GBASE-ER/EW and 10G Fibre Channel.
/
SDH STM-64, 10G Ethernet
The transceiver consists of two sections: The transmitter
section consists of a temperature-stabilized 1550 nm
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
l Dual 5V and +3.3 V Power Supply
l RoHS-6 Compliant
l -5 to 70oC Operating: XPS-2340MWG
l -5 to 85oC Operating: XPS-2340BMWG
l -40 to 85oC Operating: XPS-2340AMWG
APPLICATIONS
l SONET OC-192 IR-2
SDH STM S-64.2b
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
SONET OC-192 IR-3
SDH STM S-64.3b
ITU-T G.709
l 10GBASE-ER / EW
10GBASE-ER/EW + FEC
l 40 km 10G Fibre Channel
40 km 10G Fibre Channel + FEC
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10G
Distance
(km)
40
Wavelength
(nm)
Package
Case Temp
(oC)
RoHS
Compliant
Yes
XPS-2340MWG
XPS-2340BMWG
XPS-2340AMWG
9.95 – 11.1
9.95 – 11.1
9.95 – 11.1
Multirate*
Multirate*
Multirate*
1550 EML
1550 EML
1550 EML
XFP with DMI
XFP with DMI
XFP with DMI
-5 to 70
-5 to 85
-40 to 85
40
Yes
40
Yes
*: multirate for SONET OC-192 IR2, OC-192 IR-3, 10GBASE-ER/EW, 10G Fibre Channel, ITU-T G.709,
10GBASE-ER/EW + FEC
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 7/1/2009 V2.0