5秒后页面跳转
XP95-B6SNDR PDF预览

XP95-B6SNDR

更新时间: 2024-11-28 07:07:19
品牌 Logo 应用领域
GAMEWELL-FCI 传感器
页数 文件大小 规格书
2页 128K
描述
Analog Addressable Sensors

XP95-B6SNDR 数据手册

 浏览型号XP95-B6SNDR的Datasheet PDF文件第2页 
Series 95 Bases  
Description  
Analog Addressable Sensors  
The Gamewell-FCI XP-95 Series bases provide superior  
flexibility for the installation of the Gamewell-FCI, XP95  
family of addressable detectors. Whether the project  
requires a 4.0” (10.16 cm), relay or sounder base, the XP95  
family has a base to meet building aesthetics, constraints,  
retrofit limitations or functional needs. The device address  
is held in the base, ensuring that the device address will  
not be changed no matter how often a detector is replaced,  
and verifying a consistent match between device type and  
device address.  
Each XP95 analog addressable head is compatible with a  
wide variety of XP-95 bases, ranging from one-piece low-  
profile units to four-wire relay and sounder bases that can  
be controlled individually or as a group. The XP95 Series of  
detector bases has been designed to enable sensors to be  
plugged-in with minimum force and to have a “one-way-  
only” fit. Relay and sounder bases can be addressed and  
controlled individually or by a group in response to the  
sensor alarms.  
Series 95  
Features  
Compatible with all of the Gamewell-FCI 600 Series  
analog addressable detectors  
Base options include:  
– 4.0" (10.16 cm) or 6.0" (15.24 cm) ultra-low-profile  
bases feature "one-way" fit with low insertion force  
– 6.0" (15.24 cm) relay base (4 wire)  
– Audible alarm sounder bases controlled individually  
or by group  
Device address is stored in the sensor base  
Address is set by patented XPert addressing card  
Compatible with all Gamewell-FCI XP95 protocol  
detection devices  
Programming  
The only programming required at the Series 95 sensors is  
address setting, via the patented XPert addressing card.  
The card is inserted into the sensor base. When the sensor  
head is inserted into the base, the address is automatically  
relayed to the sensor. Changing the sensor does not  
require additional programming since the address remains  
on the XPert Card located in the base. All other sensor-  
specific programming is accomplished at the Fire Alarm  
Control Panel (FACP). The XPert addressing card ensures  
that only the correct device types can be installed in given  
locations after cleaning or other maintenance operations.  
Installation  
The complete range of Series 95 addressable mounting  
bases will accept any of the Series 95 sensors. The bases  
have a wide interior diameter for ease of access to wires  
and terminals. The design of the base is such that the  
An ISO 9000-2000 Company  
SIGNALING  
S1195  
GAMEWELL-FCI  
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118  
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.  
©2007 by Honeywell International Inc. All rights reserved.  
www.gamewell-fci.com  
CS-2048 Rev. a1 page 1 of 2  

与XP95-B6SNDR相关器件

型号 品牌 获取价格 描述 数据表
XP95-DM GAMEWELL-FCI

获取价格

Analog Addressable Discovery Multi-Sensor
XP95-I GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-ID GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-IDR GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-LI GAMEWELL-FCI

获取价格

Analog XP95 line isolator with mounting base
XP95-M GAMEWELL-FCI

获取价格

Multi-Sensor
XP95-P GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-PD GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-PDR GAMEWELL-FCI

获取价格

Analog Addressable Duct Smoke Detectors
XP95-T GAMEWELL-FCI

获取价格

Analog Addressable Thermal Sensor