Redraw.
Applicable standard
3
Operating
temperature range
Storage
-40 °C to +85 °C ( 90 %RH Max.)
-40 °C to +85 °C ( 90 %RH Max.)
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω ( 0 to 12 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
- mA Max. (DC or - Hz)
Center contact - mΩ Max.
-
-
X
X
-
-
-
-
Outer contact - mΩ Max.
500 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
100 V DC.
250 V AC for 60 sec current leakage 2 mA Max.
Frequency 0 to 10 GHz.
Frequency 10 to 12 GHz.
Frequency - to - GHz.
No breakdown.
VSWR 1.3 Max.
VSWR 1.5 Max.
- dB Max.
X
-
-
-
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ - by steel gauge.
Insertion force
Extraction force - N Min.
Insertion force - N Max.
- N Max.
-
-
-
-
-
-
-
-
Measured by applicable connector.
extraction forces
Mechanical operation
Extraction force - N Min.
No damage, crack and looseness of parts.
200 times insertion and extractions. (ML51)
100000 times insertion and extractions. (X.FL)
Frequency - to - Hz single amplitude - mm,
- m/s2 at - cycles for - directions.
X
-
-
-
-
Vibration
Shock
1)No electrical discontinuity of 1 μs.
2)No damage, crack and looseness of parts.
- m/s2 directions of pulse - ms
-
at - times for - directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min and record the strength at which
the cable or connector breaks.
- N Min.
-
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at - to - °C, - to - %
total - cycles. ( - h)
1)Insulation resistance: - MΩ Min.
(at high humidity)
2) Insulation resistance: - MΩ Min.
(at dry)
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
- → - →
- → - →
- →
- →
- °C
- min
-
-
-
Under - cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
VSWR 1.3 Max. (Frequency 0 to 10 GHz.)
VSWR 1.5 Max. (Frequency 10 to 12 GHz.)
X
Count
1
Description of revisions
DIS-D-00017761
Designed
MK.INOUE
Checked
NK.NINOMIYA
Date
20240118
3
MH.YAMANE
NK.NINOMIYA
YI.FUNADA
20130513
Remark
Approved
Checked
Designed
Drawn
20130513
20130513
20130321
RO.YOKOYAMA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC4-351202-00
SPECIFICATION SHEET
X.FLP-ML51.J-PA(F)-ST
3
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0311-0469-3-00
FORM HD0011-2-1