Redrawing
1
△
Applicable standard
Operating
Storage
-40 °C to +90 °C ( 90 %RH Max.)
-20 °C to +70 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
2
50 Ω
( 0 to 12 GHz)
----
1
△
-- W
----
Rating Power
Peculiarity
Applicable cable
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
--
X
--
ELECTRICAL CHARACTERISTICS
Contact resistance
10 mA Max.(DC or 1000 Hz)
Center contact 20 mΩ Max.
Outer contact 10 mΩ Max.
500 MΩ Min.
X
X
X
X
--
--
--
2
1
△
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
100 V DC.
1
△
200 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 3 GHz.
Frequency 3 to 6 GHz.
Frequency 6 to 9 GHz.
Frequency 9 to 12 GHz.
Frequency - to - GHz.
No flashover or breakdown.
VSWR 1.3 Max.
X
VSWR 1.4 Max.
2
X
--
--
--
1
△
VSWR 1.5 Max.
VSWR 1.6 Max.
--- dB Max.
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ
---
by steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force 30 N Max.
--- N Max.
--
--
X
X
--
--
--
--
Measured by applicable connector.
20 times insertion and extractions.
2
1
△
extraction forces
Extraction force 3 to 25 N
1)Contact resistance:
Mechanical operation
Center contact 25 mΩ Max.
Outer contact 15 mΩ Max.
X
--
2)No damage, crack and looseness of parts.
1)No electrical discontinuity of 1 μs.
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 100 Hz single amplitude 1.5 mm,
59 m/s2 at 5 cycles for 3 directions.
X
X
--
--
735 m/s2 directions of pulse 11 ms
at 3 times for 6 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of -- mm/min. and record the strength at which
the cable or connector breaks.
-- N Min.
X
--
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +40 °C, 95 %
total -- cycles.( 96 h)
1)Insulation resistance: 10 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(at dry)
X
--
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-40 → - → +90 → - °C
30 → 3 → 30 → 3 min.
X
X
--
--
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.3 Max. (Frequency 0 to 3 GHz.)
1.4 Max. (Frequency 3 to 6 GHz.)
2
1
△
1.5 Max. (Frequency 6 to 9 GHz.)
1.6 Max. (Frequency 9 to 12 GHz.)
Count
8
Description of revisions
DIS-D-00001687
Designed
MT.KANEKO
Checked
NK.NINOMIYA
Date
16.11.24
1
△
TS.NOBE
Approved
13.11.21
Remark RoHS COMPLIANT
1. The quantity of this product is 20000 connectors per reel.
NK.NINOMIYA
YI.FUNADA
YI.FUNADA
13.11.21
13.11.19
13.11.19
Checked
Designed
Drawn
2
1
△
The plug specification is applied in case the receptacle specification
differs from the plug.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC4-318791-90
SPECIFICATION SHEET
X.FL-R-SMT-1(90)
1
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL331-0701-8-90
FORM HD0011-2-1