UWQ-12/17-Q48T-C Series
www.murata-ps.com
Wide Input, Isolated DOSA Quarter Brick
DC-DC Converters with Trim and Sense
PRODUCT OVERVIEW
The UWQ-12/17-Q48T series offers high output
current (up to 17 Amps) in an industry standard
“quarter brick” package requiring no heat sink
for most applications. The UWQ-12/17-Q48T is
trimmable from 10.8Vout to 13.2Vout and includes
noise specifications deliver stable 12V BUS for
IBC applications. For systems needing controlled
startup/shutdown, an external remote On/Off con-
trol may use either positive or negative logic.
Several self-protection features include input un-
output sense pins to compensate for output voltage dervoltage lockout, output overvoltage protection,
inaccuracy delivered at the load. The UWQ-12/17-
Q48T series delivers fixed DC output voltages up
to 204 Watts (12V @17A) for printed circuit board
mounting. Wide range inputs of 18 to 75 Volts DC
(48 Volts nominal) are ideal for wireless base sta-
tions, datacom, and telecom systems.
Advanced automated surface mount assembly,
thermal management technology, and planar
magnetics deliver high reliability galvanic isolation
rated at 2250 Vdc for basic insulation. To power
digital systems, the output delivers fast settling to
current steps and stable operation where higher
capacitive loads are required. Excellent ripple and
and overtemperature shutdown (using an on-board
temperature sensor); overcurrent protection us-
ing the “hiccup” autorestart technique provides
indefinite short-circuit protection. The synchronous
rectifier topology along with advanced thermal
management delivers high efficiency for minimal
heat generation and “no heat sink” operation.
The UWQ-12/17-Q48T series is certified to
safety standards UL/EN/IEC/CSA 60950-1, 2nd
edition. It meets Class B EMI conducted emission
compliance to EN55022, CISPR22 with an external
filter.
FEATURES
Fixed DC output, 12V @17A (204W)
Industry standard quarter brick 2.3˝ x 1.45˝ x
0.46˝ (58.4 x 36.8 x 11.7mm) package without
baseplate (0.5˝ [12.7mm] with baseplate)
Wide range Vin 18 to 75 Vdc
Trimmable 10.8Vout to 13.2Vout @ 210W max.
2250 Volt Basic isolation
Remote ON/Off enable control
DOSA-compatible pinouts, with trim and sense
High efficiency synchronous rectifier topology
Stable no-load operation
APPLICATIONS
Wireless base stations embedded systems,
Monotonic startup into pre-bias output condition
Instrumentation systems, R&D platforms, auto-
mated test fixtures
Certified to UL/EN 60950-1, CSA-C22.2 No.
60950-1, 2nd edition safety approvals
datacom and telecom installations
Disk farms, data centers and cellular repeater sites
Data concentrators, voice forwarding and
speech processing systems
Extensive self-protection, OVP, input undervolt-
age, current limiting and thermal shutdown
Remote sensor systems
F1
+Vin (1)
+Vout (8)
Barrier
External
DC
Power
Source
On/Off
Control
(2)
Controller
and Power
Open = On
Reference and
Error Amplifier
Trim (6)
logic)
-Vin (3)
-Vout (4)
Figure 1. Connection Diagram
Typical topology is shown. Murata Power Solutions recommends an external fuse.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_UWQ-12-17-Q48T-C.A01 Page 1 of 17