UCD3040
UCD3028
UCD3020
www.ti.com
SLUS868H –DECEMBER 2009–REVISED OCTOBER 2013
Digital Power Controllers
Check for Samples: UCD3040, UCD3028, UCD3020
1
FEATURES
•
•
Configurable for Voltage-Mode, Average-
Current-Mode, and Resonant-Mode Control
23
•
Digital Control of up to Four Voltage Feedback
Loops
Allows Synchronization of DPWM Waveforms
Between Multiple UCD3040, UCD3020 and
UCD3028 (UCD30xx) Devices
•
Up to Eight High-Resolution Digital Pulsewidth
Modulated (DPWM) Outputs for Supporting a
Wide Range of Offline, Isolated and Non-
Isolated DC-to-DC Topologies
•
Adjustable DPWM Pulse Width Enables
Support for Current Balancing in a Multiphase
Application.
–
–
–
250-ps DPWM Pulse-Width Resolution
4-ns DPWM Frequency Resolution
•
•
High-Performance 31.25-MHz, 32-Bit ARM7
Processor
Adjustable Phase Shift Between DPWM
Outputs
32-KByte Program Flash and 2-KByte Data
Flash Memory With Error Correction Code
(ECC)
–
Adjustable Dead Band Between Each
DPWM Pair
•
•
•
4-KByte Data RAM
–
–
Active-High or -Low DPWM Polarity
4-KByte Boot ROM
Up to 2-MHz DPWM Switching Frequency
Communication Peripherals
•
Dedicated High-Speed Error Analog-to-Digital
Converter (EADC) for Each Feedback Loop
With Sense Resolution of up to 1 mV
–
–
–
–
PMBus
UART
SPI
•
•
On-Chip 10-Bit D and A Converter (DAC) for
Setting EADC Reference Voltage
JTAG (Not Available in the UCD3028)
Dedicated Hardware Accelerated Digital
Compensators or Control Law Accelerators
(CLA)
•
Single-Supply Solution: Internal Regulator
Controls External Pass Element
•
•
•
•
Internal Temperature Sensor
Up to Five Additional Timers
Built-In Watchdog, BOD, and POR
–
Three-Pole, Three-Zero Configurable
Compensator
–
–
Features Non-Linear Digital Control
80-Pin QFP (PFC), 64-Pin QFN (RGC), 48-Pin
QFN (RGZ), and 40-Pin QFN (RHA and RMH)
Package Offerings
Multiple Programmable Coefficient
Registers for Adaptive Digital
Compensation
•
Operating Temperature Range: –40°C to 125°C
•
•
Up to 15-Channel, 12-Bit, 200-ksps, Analog-to-
Digital Converter (ADC)
APPLICATIONS
Multiple Levels of Fault Protection
•
Isolated AC-to-DC and DC-to-DC Power
Supplies
–
–
–
Four High-Speed Analog Comparators
External Fault Inputs
•
•
Power-Factor Correction
12-Bit ADC
Non-Isolated DC-to-DC Power Supplies
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
Fusion Digital Power, Code Composer Studio are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated