UCC25230
www.ti.com
SLUSAQ6A – NOVEMBER 2011
12-V to 100-V Input, 0.2-A Output Switching Converter
Check for Samples: UCC25230
1
FEATURES
APPLICATIONS
2
•
Highly Integrated Converter Operating as a
Buck, or Isolated Forward-Flyback, Flybuck™
•
•
High Density Isolated Standby Bias Supplies
DC-to-DC Converters
•
Wide Operating Input Voltage Range from 12 V
to 100 V, 105-V Surge.
DESCRIPTION
The UCC25230 is a highly integrated PWM converter
operating as an isolated forward flyback. It has
high-side and low-side power switches integrated and
the control circuit with all key converter functions
included. The power stage requires only one- or
multiple winding coupled inductor and output
capacitors for the complete solution. Voltage-mode
feed-forward control with external compensation
allows optimal output filter selection over wide input
voltage range. The UCC25230 has fixed frequency
set internally at 380 kHz. It also includes input voltage
UVLO and OVLO comparators with hysteresis and
input-good, open-collector output signal which can be
used to enable PWM controllers.
•
•
Up to 0.2-A Output Current
9-V Always Available VDD Output with up to
2-mA Current Capability
•
•
Thermally Enhanced 4-mm x 4-mm
SON-8/S-PVSON-N8 (DRM) Package
Internally Set Fixed 380-kHz Switching
Frequency
•
•
Internal 2-ms Duration Soft Start
Voltage Mode Control with Input Feed Forward
Allows Optimal Output Filter Design
•
•
•
2% Accuracy Internal 2.5-V Reference
VDD UVLO
UCC25230 is available in a thermally enhanced 8-pin
SON package with PowerPad™ serving as a ground
pin.
Cycle-by-Cycle Current Limit with Frequency
Fold Back for Initial Start up Under High
Capacitive Loads
Other features include internal soft start and
cycle-by-cycle current protection. Measured efficiency
of isolated converter over input voltage and output
current ranges are shown in Figure 2.
•
Input UVLO and OVLO with Input Good Signal
Isolated Buck Converter
100 V
VDD
7
VIN
8 V
100 mA
8
1
6
5
BOOT
UV/OV
VIN_G
PHASE
COMP
2
3
4
8 V
100 mA
FB
GND PAD
9
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPad, Flybuck are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated