WIRELESS COMMUNICATIONS DIVISION
TQ5132
Control 2
RFA Gain
Select
DATA SHEET
RF
IN
VDD
Control 1
Mode Select/
LO Input
LO
IN
3V Cellular Band
CDMA/AMPS RFA/Mixer
IC
GND
GIC
Control 3
IFA Gain
Select
AMPS
IF Out
CDMA IF
IF
Out
Out
IF Out
Features
ꢀ Small size: SOT23-8
ꢀ Single 3V operation
ꢀ Low-current operation
ꢀ Gain Select
Product Description
The TQ5132 is a 3V, RFA/Mixer IC designed specifically for Cellular band
CDMA/AMPS applications. It’s RF performance meets the requirements of products
designed to the IS-95 and AMPS standards. The TQ5132 is designed to be used
with the TQ3131 or TQ3132 (CDMA/AMPS LNA) which provides a complete CDMA
receiver for 800MHz dual-mode phones.
ꢀ Mode Select
ꢀ High IP3 performance
ꢀ Few external components
The RFA/Mixer incorporates on-chip switches which determine CDMA, AMPS and
bypass mode select. When used with the TQ3131 or TQ3132 (CDMA/AMPS LNA),
four gain steps are available. The RF input port is internally matched to 50 Ω,
greatly simplifying the design and keeping the number of external components to a
minimum. The TQ5132 achieves good RF performance with low current
consumption, supporting long standby times in portable applications. Coupled with
the very small SOT23-8 package, the part is ideally suited for Cellular band mobile
phones.
Applications
ꢀ IS-95 CDMA Mobile Phones
ꢀ AMPS Mobile Phones
Electrical Specifications1
ꢀ Dual Mode CDMA Cellular application
Parameter
Min
Typ
881
15.0
4.5
Max
Units
MHz
dB
Frequency
Gain
Noise Figure
Input 3rd Order Intercept
DC supply Current
dB
2.5
dBm
mA
15.0
Note 1: Test Conditions: Vdd=2.8V, RF=881MHz, LO=966MHz, IF=85MHz, Ta=25C, CDMA High Gain
state.
For additional information and latest specifications, see our website: www.triquint.com
1