TPS54386-Q1
www.ti.com
SLUSAZ9A –MARCH 2012–REVISED MARCH 2012
3-A DUAL NON-SYNCHRONOUS CONVERTER WITH INTEGRATED HIGH-SIDE MOSFET
Check for Samples: TPS54386-Q1
1
FEATURES
APPLICATIONS
23
•
Qualified for Automotive Applications
•
Power for DSP
•
AEC-Q100 Qualified With the Following
Results:
•
Consumer Electronics
CONTENTS
–
Device Temperature Grade 2: –40°C to
+105°C Ambient Operating Temperature
Device Ratings
2
3
Electrical Characteristics
Device Information
Application Information
Design Examples
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
9
12
32
44
•
•
4.5-V to 28-V Input Range
Output Voltage Range 0.8 V to 90% of Input
Voltage
Additional References
•
•
•
Output Current Up to 3 A
DESCRIPTION
Fixed Switching Frequency: 600 kHz
The TPS54386-Q1 are dual-output, non-synchronous
buck converters capable of supporting 3-A output
applications that operate from a 4.5-V to 28-V input
supply voltage, and require output voltages between
0.8 V and 90% of the input voltage.
Three Selectable Levels of Overcurrent
Protection (Output 2)
•
•
•
•
0.8-V 1.5% Voltage Reference
2.1-ms Internal Soft Start
With an internally-determined operating frequency,
soft-start time, and control-loop compensation, these
converters provide many features with a minimum of
Dual PWM Outputs 180° Out-of-Phase
Ratiometric or Sequential Startup Modes
Selectable by a Single Pin
external
components.
Channel-1
overcurrent
protection is set at 4.5 A, whereas the channel-2
overcurrent protection level is selected by connecting
a pin to ground, to BP, or left floating. The setting
levels are used to allow for scaling of external
components for applications that do not need the full
load capability of both outputs.
•
•
•
•
•
•
85-mΩ Internal High-Side MOSFETs
Current Mode Control
Internal Compensation
Pulse-by-Pulse Overcurrent Protection
Thermal Shutdown Protection at 148°C
14-Pin PowerPAD™ HTSSOP Package
The outputs may be enabled independently, or may
be configured to allow either ratiometric or sequential
start-up sequencing. Additionally, the two outputs
may be powered from different sources.
VIN
TPS54386
1
PVDD1 PVDD2 14
BOOT1 BOOT2 13
2
3
4
5
6
7
OUTPUT1
SW1
GND
EN1
EN2
FB1
SW2 12
BP 11
SEQ 10
ILIM2
FB2
9
8
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated