TPS2045B, TPS2055B
DBV-5
D-8
D-16
TPS2046B, TPS2047B
www.ti.com
SLVS532C–JULY 2004–REVISED OCTOBER 2007
CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES
1
FEATURES
APPLICATIONS
•
Heavy Capacitive Loads
•
70-mΩ High-Side MOSFET
•
Short-Circuit Protections
•
•
•
•
•
•
•
•
•
250-mA Continuous Current
Thermal and Short-Circuit Protection
Accurate Current Limit (0.3 A min, 0.7 A max)
Operating Range: 2.7 V to 5.5 V
0.6-ms Typical Rise Time
TPS2047B
D PACKAGE
(TOP VIEW)
TPS2045B/TPS2055B
DBV PACKAGE
(TOP VIEW)
TPS2046B
D PACKAGE
(TOP VIEW)
OUT
IN
GND
IN
GND
IN1
OC1
OC1
OUT1
OUT2
OUT1
OUT2
OC2
GND
OC
EN1
EN2
EN1
EN2
GND
EN †
OC2
Undervoltage Lockout
OC3
Deglitched Fault Report (OC)
No OC Glitch During Power Up
TPS2045B/TPS2055B
D PACKAGE
(TOP VIEW)
IN2
OUT3
NC
NC
EN3
NC
GND
IN
OUT
OUT
OUT
Maximum Standby Supply Current:
1-μA (Single and Dual) or 2-μA (Triple)
NC - No Connection
IN
EN †
OC
•
•
•
•
Bidirectional Switch
†All enable inputs are active high (EN) for the TPS2055B.
Ambient Temperature Range: –40°C to 85°C
ESD Protection
UL Pending
DESCRIPTION
The TPS204xB/TPS2055B power-distribution switches are intended for applications where heavy capacitive
loads and short circuits are likely to be encountered. These devices incorporate 70-mΩ N-channel MOSFET
power switches for power-distribution systems that require multiple power switches in a single package. Each
switch is controlled by a logic-enable input. Gate drive is provided by an internal charge pump designed to
control the power-switch rise times and fall times to minimize current surges during switching. The charge pump
requires no external components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output current
to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When
continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction
temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal
shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains
off until valid input voltage is present. This power-distribution switch is designed to set current limit at 0.5 A
typically.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2004–2007, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.