TPPM0111
DUAL LOW-DROPOUT LINEAR REGULATOR
SLVS414 – DECEMBER 2001
DWP HSOP PACKAGE
(TOP VIEW)
D Dual Voltage Output, 3.3 V ±3% and
1.5 V ±2%
D 3.3-V Output Within 2 V of 1.5-V Output
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
NC
NC
NC
GND
NC
NC
NC
NC
NC
NC
NC
NC
NC
Under All Conditions
D
1.5-A Load Current Capability on 3.3-V
Output
3.3VOUT
NC
5VCC
NC
1.5VOUT
NC
D 300-mA Load Current Capability on
1.5-V Output
D Overcurrent Protection for Both
Outputs
NC
D Thermally-Enhanced Packaging
Concept for Efficient Heat Management
D Thermal Shutdown to Protect Device
During Excessive Power Dissipation
description
The TPPM0111 is a power source intended for use in systems that have a single 5-V input source and require
dual, linearly-regulated, low-dropout voltage sources. The outputs must track within 2 V of each other during
all conditions and modes of operation. Each output is protected against overcurrent conditions. In the event that
one of the outputs is shorted to ground, the other output must maintain a voltage output differential of less than
2 V compared to the output with the abnormal condition.
The 3.3-V ±3% regulated output is capable of driving loads of 1.5 A, and the 1.5-V ±2% regulated output is
capable of driving loads of 300 mA under all normal operating conditions. The device is available in a
PowerPAD thermally-enhanced package for efficient heat management, and requires a copper plane to
dissipate the heat.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265