TLV320AIC3105
www.ti.com......................................................................................................................................... SLAS513B–FEBRUARY 2007–REVISED DECEMBER 2008
LOW-POWER STEREO AUDIO CODEC FOR PORTABLE AUDIO/TELEPHONY
1
FEATURES
APPLICATIONS
•
Digital Cameras
•
Stereo Audio DAC
•
Smart Cellular Phones
–
–
–
–
–
102-dBA Signal-to-Noise Ratio
16/20/24/32-Bit Data
DESCRIPTION
Supports Rates From 8 kHz to 96 kHz
3D/Bass/Treble/EQ/De-Emphasis Effects
The TLV320AIC3105 is a low-power stereo audio
codec with multiple single-ended inputs and and a
stereo headphone amplifier. The output stages are
programmable in single-ended or fully differential
configurations. Extensive register-based power
control is included, enabling stereo 48-kHz DAC
playback as low as 14 mW from a 3.3-V analog
supply, making it ideal for portable battery-powered
audio and telephony applications.
Flexible Power Saving Modes and
Performance are Available
•
Stereo Audio ADC
–
–
–
92-dBA Signal-to-Noise Ratio
Supports Rates From 8 kHz to 96 kHz
Digital Signal Processing and Noise
Filtering Available During Record
The record path of the TLV320AIC3105 contains
integrated microphone bias, digitally controlled stereo
microphone preamplifier, and automatic gain control
(AGC), with mix/mux capability among the multiple
analog inputs. Programmable filters are available
during record which can remove audible noise that
can occur during optical zooming in digital cameras.
The playback path includes mix/mux capability from
the stereo DAC and selected inputs, through
programmable volume controls, to the various
outputs.
•
•
Six Audio Input Pins
Six Stereo Single-Ended Inputs
Six Audio Output Drivers
–
–
Stereo Fully Differential or Single-Ended
Headphone Drivers
–
Fully Differential Stereo Line Outputs
•
•
Low Power: 14-mW Stereo 48-kHz Playback
With 3.3-V Analog Supply
Ultralow-Power Mode with Passive Analog
Bypass
The TLV320AIC3105 contains four high-power output
drivers as well as two fully differential output drivers.
The high-power output drivers are capable of driving
a variety of load configurations, including up to four
channels of single-ended 16-Ω headphones using
ac-coupling capacitors, or stereo 16-Ω headphones in
a capacitorless output configuration.
•
•
•
•
Programmable Input/Output Analog Gains
Automatic Gain Control (AGC) for Record
Programmable Microphone Bias Level
Programmable PLL for Flexible Clock
Generation
I2C Control Bus
Audio Serial Data Bus Supports I2S,
The stereo audio DAC supports sampling rates from
8 kHz to 96 kHz and includes programmable digital
filtering in the DAC path for 3D, bass, treble,
midrange effects, speaker equalization, and
de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates.
The stereo audio ADC supports sampling rates from
8 kHz to 96 kHz and is preceded by programmable
gain amplifiers or AGC that can provide up to 59.5-dB
analog gain for low-level microphone inputs. The
TLV320AIC3105 provides an extremely high range of
programmability for both attack (8–1,408 ms) and for
decay (0.05–22.4 seconds). This extended AGC
range allows the AGC to be tuned for many types of
applications.
•
•
Left/Right-Justified, DSP, and TDM Modes
•
•
Extensive Modular Power Control
Power Supplies:
–
–
–
Analog: 2.7 V–3.6 V.
Digital Core: 1.525 V–1.95 V
Digital I/O: 1.1 V–3.6 V
•
Package: 5-mm × 5-mm 32-Pin QFN
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2008, Texas Instruments Incorporated