TLV320AIC3106
www.ti.com ........................................................................................................................................ SLAS509E–DECEMBER 2006–REVISED DECEMBER 2008
LOW-POWER STEREO AUDIO CODEC FOR PORTABLE AUDIO/TELEPHONY
1
FEATURES
•
Power Supplies:
23
•
Stereo Audio DAC
–
–
–
Analog: 2.7 V–3.6 V.
–
–
–
–
–
102-dBA Signal-to-Noise Ratio
16/20/24/32-Bit Data
Digital Core: 1.65 V–1.95 V
Digital I/O: 1.1 V–3.6 V
Supports Rates From 8 kHz to 96 kHz
3D/Bass/Treble/EQ/De-Emphasis Effects
•
Packages: 5-mm × 5-mm 80-VFBGA;
7-mm × 7-mm 48-QFN
Flexible Power Saving Modes and
Performance are Available
APPLICATIONS
•
•
Digital Cameras
Smart Cellular Phones
•
Stereo Audio ADC
–
–
–
92-dBA Signal-to-Noise Ratio
Supports Rates From 8 kHz to 96 kHz
DESCRIPTION
Digital Signal Processing and Noise
Filtering Available During Record
The TLV320AIC3106 is a low-power stereo audio
codec with stereo headphone amplifier, as well as
multiple inputs and outputs programmable in
single-ended or fully differential configurations.
Extensive register-based power control is included,
enabling stereo 48-kHz DAC playback as low as 15
mW from a 3.3-V analog supply, making it ideal for
portable battery-powered audio and telephony
applications.
•
•
Ten Audio Input Pins
–
Programmable in Single-Ended or Fully
Differential Configurations
–
3-State Capability for Floating Input
Configurations
Seven Audio Output Drivers
–
Stereo Fully Differential or Single-Ended
Headphone Drivers
The record path of the TLV320AIC3106 contains
integrated microphone bias, digitally controlled stereo
microphone preamplifier, and automatic gain control
(AGC), with mix/mux capability among the multiple
analog inputs. Programmable filters are available
during record which can remove audible noise that
can occur during optical zooming in digital cameras.
The playback path includes mix/mux capability from
the stereo DAC and selected inputs, through
programmable volume controls, to the various
outputs.
–
–
Fully Differential Stereo Line Outputs
Fully Differential Mono Output
•
•
Low Power: 15-mW Stereo 48-kHz Playback
With 3.3-V Analog Supply
Ultralow-Power Mode with Passive Analog
Bypass
•
•
•
•
Programmable Input/Output Analog Gains
Automatic Gain Control (AGC) for Record
Programmable Microphone Bias Level
The TLV320AIC3106 contains four high-power output
drivers as well as three fully differential output drivers.
The high-power output drivers are capable of driving
a variety of load configurations, including up to four
channels of single-ended 16-Ω headphones using
ac-coupling capacitors, or stereo 16-Ω headphones in
a capacitorless output configuration.
Programmable PLL for Flexible Clock
Generation
Control Bus Selectable SPI or I2C
Audio Serial Data Bus Supports I2S,
•
•
Left/Right-Justified, DSP, and TDM Modes
•
•
Alternate Serial PCM/I2S Data Bus for Easy
Connection to Bluetooth™ Module
Concurrent Digital Microphone and Analog
Microphone Support Available
•
Extensive Modular Power Control
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
MicroStar Junior is a trademark of Texas Instruments.
Bluetooth is a trademark of Bluetooth SIG, Inc.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2008, Texas Instruments Incorporated