Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TLV767-Q1
SBVS381 –APRIL 2020
TLV767-Q1 1-A, 16-V Linear Voltage Regulator
1 Features
3 Description
The TLV767-Q1 is a wide input linear voltage
regulator supporting an input voltage range from
2.5 V to 16 V and up to 1 A of load current. The
output range is from 0.8 V to 12 V or up to 14.6 V
with the adjustable version.
1
•
AEC-Q100 qualified for automotive applications:
–
–
Temperature grade 1: –40ºC to +125ºC, TA
Junction temperature: –40ºC to +150ºC, TJ
•
•
Input voltage range: 2.5 V to 16 V (18 V max)
Output voltage range:
The wide input voltage range makes the device a
good choice for operating from transformer secondary
windings and regulated rails such as 10 V or 12 V.
Additionally, the wide output voltage range allows the
device to generate the bias voltage for SiC gate
drivers and microphones as well as power
microcontrollers (MCUs) and processors.
–
–
0.8 V to 14.6 V (adjustable)
1.2 V to 12 V (fixed, 100-mV steps)
•
•
1% output accuracy over load and temperature
Low quiescent current (IQ):
–
–
50 µA (typ) with no load
3 µA (max) when disabled
The TLV767-Q1 has a 1% output accuracy that is
required for powering digital loads with tight supply
requirements.
•
•
•
•
•
High PSRR: 70 dB at 1 kHz, 46 dB at 1 MHz
Internal soft-start time: 500 µs (typical)
Fold-back current limiting and thermal protection
Stable with a 1-µF or larger capacitor
The internal soft-start circuit reduces inrush current
during startup, thus allowing for smaller input
capacitance.
Package: 8-pin, 3-mm × 3-mm WSON with
wettable flanks
Wide bandwidth PSRR performance is greater than
70 dB at 1 kHz and 46 dB at 1 MHz, which helps
attenuate the switching frequency of an upstream
DC/DC converter and minimizes post regulator
filtering. The high ripple rejection from 20 Hz to 20
kHz make the device a good choice for powering
audio components.
–
Low thermal resistance (RθJA): 56.2°C/W
2 Applications
•
•
•
•
DC/DC converters
Inverter and motor controls
On-board (OBC) and wireless chargers
Automotive head units
The TLV767-Q1 is available in a 8-pin, 3-mm × 3-mm
VSON (DRB) package with wettable flanks and low
thermal resistance.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TLV767-Q1
VSON (8)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Circuit
Reduced Inrush Current With 22 µF at COUT
9
0.75
8
0.5
OUT
FB
IN
7
0.25
0
TLV767-Q1
6
CIN
R1 CFF COUT
EN
5
-0.25
-0.5
-0.75
-1
VOUT
IIN
VIN
GND
4
3
R2
VEN
2
1
-1.25
-1.5
-1.75
0
-1
0
0.5
1
1.5
2
2.5
Time (ms)
3
3.5
4
4.5
5
D003
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for pre-production products; subject to
change without notice.