TLC59208F
www.ti.com .................................................................................................................................................................................................. SCLS715–MARCH 2009
8-BIT FM+ I2C BUS LED DRIVER
1
FEATURES
•
Eight LED Drivers (Each Output Programmable
at OFF, ON, Programmable LED Brightness,
Programmable Group Dimming/Blinking Mixed
With Individual LED Brightness)
•
Up to 64 Possible Hardware Adjustable
Individual I2C Bus Addresses Per Device so
That Each Device Can be Programmed
Individually
•
•
Eight Open-Drain Output Channels
•
Output State Change Programmable on the
Acknowledge or the STOP Command to
Update Outputs Byte-by-Byte or All at the
Same Time (Default to 'Change on STOP')
256-Step (8-Bit) Linear Programmable
Brightness Per LED Output Varying From Fully
Off (Default) to Maximum Brightness Using a
97-kHz PWM Signal
•
•
•
Maximum Output Current: 50 mA
Maximum Output Voltage: 17 V
•
•
256-Step Group Brightness Control Allows
General Dimming [Using a 190-Hz PWM Signal
From Fully Off to Maximum Brightness
(Default)]
25-MHz Internal Oscillator Requires no
External Components
1-MHz Fast-Mode Plus (FM+) Compatible I2C
Bus Interface With 30 mA High Drive
Capability on SDA Output for Driving High
Capacitive Buses
•
256-Step Group Blinking With Frequency
Programmable From 24 Hz to 10.73 s and Duty
Cycle From 0% to 99.6%
•
•
64 Programmable Slave Addresses Using
Three Hardware Address Pins
•
•
•
•
•
•
•
•
•
Internal Power-On Reset
Noise Filter on SCL/SDA Inputs
No Glitch on Power Up
Active-Low Reset (RESET)
Supports Hot Insertion
Low Standby Current
Four Software Programmable I2C Bus
Addresses (One LED Group Call Address and
Three LED Sub Call Addresses) Allow Groups
of Devices to be Simultaneously Addressed
Any Combination (For Example, One Register
Used for ‘All Call’ so That All the TLC59208Fs
on the I2C Bus Can be Simultaneously
Addressed and the Second Register Used for
Three Different Addresses so That One Third
of All Devices on the Bus Can be
3.3-V or 5-V Supply Voltage
5.5-V Tolerant Inputs
Packages Offered: 16-Pin Thin Shrink
Small-Outline Package [TSSOP (PW)], 16-Pin
Quad Flatpack No Lead [QFN (RGY)]
Simultaneously Addressed)
Software Enable and Disable for I2C Bus
Address
•
–40°C to 85°C Operation
•
•
•
Software Reset Feature (SWRST Call) Allows
the Device to be Reset Through the I2C Bus
Up to 14 Possible Hardware Adjustable
Individual I2C Bus Addresses Per Device so
That Each Device Can be Programmed
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated