TLC5921
LED DRIVER
SLLS390 – SEPTEMBER 1999
DAP PACKAGE
(TOP VIEW)
Drive Capability and Output Counts
– 80 mA (Current Sink) x 16 Bits
Constant Current Output Range
– 1 to 80 mA (Current Value Setting for All
Output Terminals Using External Resistor)
GND
BLANK
XLAT
VCC
1
32
31
30
29
28
27
26
25
24
23
22
IREF
2
SOMODE
XDOWN
SOUT
3
Constant Current Accuracy
– ±1% (Typ)
– ±4% (Max) (Maximum Error Between
Bits, All Bits On)
SCLK
SIN
4
5
PGND
OUT0
OUT1
PGND
OUT2
OUT3
PGND
OUT15
OUT14
PGND
OUT13
OUT12
6
7
Voltage Applied to Constant Current Output
Terminal
– Minimum 0.6 V (Output Current 40 mA)
– Minimum 1 V (Output Current 80 mA)
8
9
10
11
Data Input
– Clock Synchronized 1 Bit Serial Input
OUT4 12
OUT5 13
PGND 14
21 OUT11
20 OUT10
19 PGND
Data Output
15
16
18
17
– Clock Synchronized 1 bit Serial Output
(With Timing Selection)
OUT6
OUT7
OUT9
OUT8
Input/Output Signal Level . . . CMOS Level
Power Supply Voltage . . . 4.5 V to 5.5V
Maximum Output Voltage . . . 17 V (Max)
Data Transfer Rate . . . 20 MHz (Max)
Operating Free-Air Temperature Range
–20°C to 85°C
Available in 32 Pin HTSSOP DAP Package
(P =3.9 W,
D
T = 25°C)
A
LOD Function . . . LED Open Detection
(Error Signal Output at LED Disconnection)
TSD Function . . . Thermal Shutdown (Turn
Output Off When Junction Temperature
Exceeds Limit)
description
The TLC5921 is a current-sink constant current driver incorporating shift register and data latch. The current
value at constant current output can be set by one external register. The device also incorporates thermal
shutdown (TSD) circuitry which turns constant current output off when the junction temperature exceeds the
limit, and LED open detection (LOD) circuitry to report the LED was disconnected.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265