5秒后页面跳转
捷配首页

Datasheet > 驱动程序和接口 > 显示驱动器> TLC5917QDRQ1
TLC5917QDRQ1 PDF预览

TLC5917QDRQ1

更新时间： 2024-11-29 12:15:51
品牌 Logo 应用领域
德州仪器 - TI 显示驱动器驱动程序和接口接口集成电路光电二极管PC
页数 文件大小 规格书
26页 588K
描述
8-BIT CONSTANT-CURRENT LED SINK DRIVERS

阅读下载

中文翻译

获取价格

TLC5917QDRQ1 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：SOIC
包装说明：SOIC-16针数：16
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01Factory Lead Time：1 week
风险等级：1.7Samacsys Confidence：3
Samacsys Status：ReleasedSamacsys PartID：307603
Samacsys Pin Count：16Samacsys Part Category：Integrated Circuit
Samacsys Package Category：Small Outline PackagesSamacsys Footprint Name：d (r-pdso-g16)-
Samacsys Released Date：2019-11-08 07:52:40Is Samacsys：N
数据输入模式：SERIAL显示模式：SEGMENT
输入特性：STANDARD接口集成电路类型：LED DISPLAY DRIVER
JESD-30 代码：R-PDSO-G16JESD-609代码：e4
长度：9.9 mm湿度敏感等级：1
复用显示功能：NO功能数量：1
区段数：8端子数量：16
最高工作温度：125 °C最低工作温度：-40 °C
输出特性：CONSTANT-CURRENT封装主体材料：PLASTIC/EPOXY
封装代码：SOP封装等效代码：SOP16,.25
封装形状：RECTANGULAR封装形式：SMALL OUTLINE
峰值回流温度（摄氏度）：260电源：3.3/5 V
认证状态：Not Qualified筛选级别：AEC-Q100
座面最大高度：1.75 mm子类别：Display Drivers
最大压摆率：24 mA最大供电电压：5.5 V
最小供电电压：3 V标称供电电压：3.3 V
表面贴装：YES温度等级：AUTOMOTIVE
端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)端子形式：GULL WING
端子节距：1.27 mm端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：3.9 mm
最小 fmax：30 MHzBase Number Matches：1

TLC5917QDRQ1 数据手册

 浏览型号TLC5917QDRQ1的Datasheet PDF文件第2页浏览型号TLC5917QDRQ1的Datasheet PDF文件第3页浏览型号TLC5917QDRQ1的Datasheet PDF文件第4页浏览型号TLC5917QDRQ1的Datasheet PDF文件第5页浏览型号TLC5917QDRQ1的Datasheet PDF文件第6页浏览型号TLC5917QDRQ1的Datasheet PDF文件第7页 
TLC5916-Q1, TLC5917-Q1  
8-BIT CONSTANT-CURRENT LED SINK DRIVERS  
www.ti.com  
SLVS814–JANUARY 2008  
1
FEATURES  
•
Qualified for Automotive Applications  
•
•
•
•
•
Fast Response of Output Current  
30-MHz Clock Frequency  
Schmitt-Trigger Input  
•
•
Eight Constant-Current Output Channels  
Output Current Adjusted Through External  
Resistor  
3.3-V or 5-V Supply Voltage  
•
•
•
Constant Output Current Range:  
5 mA to 120 mA  
Thermal Shutdown for Overtemperature  
Protection  
Constant Output Current Invariant to Load  
Voltage Change  
APPLICATIONS  
•
•
•
•
•
•
General LED Lighting Applications  
LED Display Systems  
LED Signage  
Automotive LED Lighting  
White Goods  
Open Load, Short Load, and Overtemperature  
Detection  
•
•
256-Step Programmable Global Current Gain  
Excellent Output Current Accuracy:  
–
–
Between Channels: < ±3% (Max)  
Between ICs: < ±6% (Max)  
Gaming Machines/Entertainment  
DESCRIPTION/ORDERING INFORMATION  
The TLC5916/TLC5917 is designed for LED displays and LED lighting applications with constant-current control  
and open-load, shorted-load, and overtemperature detection. The TLC5916/TLC5917 contains an 8-bit shift  
register and data latches, which convert serial input data into parallel output format. At the output stage, eight  
regulated current ports are designed to provide uniform and constant current for driving LEDs within a wide range  
of VF variations. Used in system design for LED display applications, e.g., LED panels, it provides great flexibility  
and device performance. Users can adjust the output current from 5 mA to 120 mA through an external resistor,  
Rext, which gives flexibility in controlling the light intensity of LEDs. The devices are designed for up to 17 V at  
the output port. The high clock frequency, 30 MHz, also satisfies the system requirements of high-volume data  
transmission.  
The TLC5916/TLC5917 provides a Special Mode in which two functions are included, Error Detection and  
Current Gain Control. There are two operation modes and three phases: Normal Mode phase, Mode Switching  
transition phase, and Special Mode phase. The signal on the multiple function pin OE(ED2) is monitored to  
determine the mode. When an one-clock-wide pulse appears on OE(ED2), the device enters the Mode Switching  
phase. At this time, the voltage level on LE(ED1) determines the mode to which the TLC5916/TLC5917 switches.  
In the Normal Mode phase, the serial data can be transferred into TLC5916/TLC5917 via the pin SDI, shifted in  
the shift register, and transferred out via the pin SDO. LE(ED1) can latch the serial data in the shift register to the  
output latch. OE(ED2) enables the output drivers to sink current.  
In the Special Mode phase, the low-voltage-level signal OE(ED2) can enable output channels and detect the  
status of the output current, to determine if the driving current level is sufficient. The detected Error Status is  
loaded into the 8-bit shift register and shifted out via the pin SDO, synchronous to the CLK signal. The system  
controller can read the error status and determine whether or not the LEDs are properly lit.  
In the Special Mode phase, the TLC5916/TLC5917 allows users to adjust the output current level by setting a  
runtime-programmable Configuration Code. The code is sent into the TLC5916/TLC5917 via SDI. The positive  
pulse of LE(ED1) latches the code in the shift register into a built-in 8-bit configuration latch, instead of the output  
latch. The code affects the voltage at the terminal R-EXT and controls the output-current regulator. The output  
current can be finely adjusted by a gain ranging from 1/12 to 127/128 in 256 steps. Therefore, the current skew  
between ICs can be compensated within less than 1%. This feature is suitable for white balancing in LED color  
display panels.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2008, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
1234567...26

中文翻译

下载PDF

与TLC5917QDRQ1相关器件

型号 品牌 获取价格 描述 数据表
TLC5920 TI

获取价格

 		16x8 BIT LED DRIVER/CONTROLLER
TLC59208F TI

获取价格

 		8-BIT FM I2C BUS LED DRIVER
TLC59208F_1 TI

获取价格

 		8-BIT FM I2C BUS LED DRIVER
TLC59208FIPWR TI

获取价格

 		8-BIT FM+ I2C BUS LED DRIVER
TLC59208FIRGYR TI

获取价格

 		8-BIT FM+ I2C BUS LED DRIVER
TLC5920DL TI

获取价格

 		16x8 BIT LED DRIVER/CONTROLLER
TLC5920DLG4 TI

获取价格

 		具有 10MHz 数据传输速率的 16 通道 LED 驱动器 | DL | 48 | -2
TLC5920DLR TI

获取价格

 		16-channel LED driver with 10Mhz data transfer rate 48-SSOP -20 to 85
TLC5921 TI

获取价格

 		LED DRIVER
TLC59210 TI

获取价格

 		8-BIT DMOS SINK DRIVER WITH LATCH

与TLC5917QDRQ1相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证